NEC R1000 manual Station Transfer, Using a Multiline Terminal with a call in progress

FEATURE

DESCRIPTION

SYSTEM

AVAILABILITY

OPERATING PROCEDURES

September 2003

Doc. No. 8283 - Release 1.0

Station Transfer allows any station user in the system to transfer any call to any other station. Outside calls can be transferred to Multiline Terminals without the direct line appearance. To initiate Call Transfer, press the Transfer key on a Multiline Terminal or use the hookswitch on a Single Line Telephone. The transfer is completed by going on-hook on a Multiline Terminal or Single Line Telephone.

Terminal Type

All Multiline Terminals

Required Components

None

Using a Multiline Terminal with a call in progress:

1.Press N. Receive internal dial tone. The call is placed on Non-Exclusive Hold.

2.Dial the station number where the call is to be transferred.

3.Hang up.

Using a Single Line Telephone with a call in progress:

1.Provide hookflash. The call is put on Exclusive Hold. Receive internal dial tone.

2.Dial the station number of the station where call is to be transferred.

3.Hang up.

- OR -

When the party answers, announce the transfer.

4.Restore the handset (transfer is completed).