ClearSounds ANS3000 manual Ringer Number of Rings, Outgoing Message OGM

3.When the correct day is announced, press and hold the Day key and you will hear a confirmation beep and the day will be repeated.

Note: If the AC adapter is unplugged, the day will need to be set again.

* Caller ID Service is a subscription service from your telephone service provider.

█Ringer (Number of Rings)

This is the number of rings after the answering machine takes an incoming call and plays your outgoing message. You can select from 2 to 6 rings or toll saver mode. If you select Toll Saver, the unit answers after the 3rd ring if there are new messages waiting or after the 6th ring if there are no new messages waiting. To set the number of rings:

1.Press and hold the Ringer key until the current number of rings is displayed.

2.Press the Ringer key repeatedly to choose the desired number of rings (2-6 rings or Toll Saver). Every time you press this key, the LED shows the current setting (r2-r6 or L5, which is Toll Saver).

3.When the desired number of rings is displayed, press and hold the Ringer key and you will hear a confirmation beep.

█Outgoing Message (OGM)

The answering machine offers 2 modes for operation. OGM1 will answer and record, which is the conventional outgoing message that allows the caller to leave a message. OGM2 will answer only, which is the outgoing message that does not allow a caller to leave a message (this message will be played when your answering machine is full or you can manually select this message).

Each OGM can be up to 3 minutes. The answering machine comes with a pre-recorded message for each OGM. The default

10 – ENGLISH