ClearSounds ANS3000 manual Volume Control, Speed Control, Remote Access

█Volume Control

When playing the OGM or messages, press the Vol+ or Vol- key to increase or decrease the voice volume. The LED will show the corresponding volume level (10 levels).

█Speed Control

There are 3 levels of message playback speed and you can adjust the playback speed to your needs. To set the speed:

1.Press and hold the Speed key until the current setting is displayed.

2.Press the Speed key repeatedly to adjust the speed. Every time you press this key, the LED shows the current setting (P1, P2 or P3) and you will hear “1,2,3” announced at the corresponding speed . At level 1, the messages will be played back at a normal speed. At level 2, the messages will be played back at a slower speed and at level 3, the messages will be played back at the slowest speed.

3.When the desired speed is displayed, press and hold the Speed key and you will hear a confirmation beep.

Note: You can not adjust the speed in the middle of message playback.

█Remote Access

You can access many features of your answering machine remotely from any touch tone phone. A four-digit PIN is required to access the system and the default PIN is ‘0000’ (See Remote Access Code for instructions on changing the PIN). To enter remote access:

1.Dial your telephone number from any touch tone telephone.

2.When the outgoing message starts to play, you may enter the PIN.

13 – ENGLISH