Binatone SC2050 manual If the fault persists

Page 35

Troubleshooting

If the fault persists...

Disconnect all other instruments connected to the same line as the digital cordless telephone and try to make a call.

Disconnect the base unit from the telephone line and plug a different phone into the master telephone socket. Try making a call. If this works, the line is OK.

If the call does not work, and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty.

If you cannot make a call, the fault may be on the exchange line. Contact the service provider (the BT engineers on 151 for UK only, or your cable company).

If you still cannot identify the cause of the problem, contact the Binatone Help Line on 0845 345 9677.

Cleaning and care

nDo not clean any part of your digital cordless telephone with benzene, thinners or other solvent chemicals as this may cause permanent damage which is not covered by the Guarantee. When necessary, clean it with a damp cloth.

nKeep your digital cordless telephone away from hot, humid conditions or strong sunlight, and don’t let it get wet.

nEvery effort has been made to ensure high standards of reliability for your digital cordless telephone. However, if something does go wrong, please do not try to repair it - consult your supplier or the Binatone Help Line.

Binatone Help Line: 0845 345 9677 34

Image 35
Contents User Guide If you need help Where to find it the cordless handset Where to find it the base telephone Contents Contents Handset WhatthesymbolsmeanIf you have a Broadband line Read these notes firstPage Installation and set-up Installation and set-up Charge light comes on Making and answering calls Press the Volume +/- buttons to set your desired ring melody Press the Volume +/- buttonsTo make a Memory diallingOn and off but you must press the Talk When the handset ringsHandset’s Speakerphone Your earLast Number Redial To mute the mouthpiece To lock the keypad Earpiece volume Ringer volume Ringer melody Display shows HS-. Within the 5 seconds Telephone to CordlessButton until you hear a beep and a TelephoneAn intercom call When the cordless handset is idle, pressTo page the cordless Handset » Number, e.g for HandsetGoes back to standby mode. The number is now stored Memory dialling Caller Display Display ‘beep’ Record To return a »Multi-handset use Multi-handset use Between two To shuttleConference calls New Call tone ‘Intercom’ symbols are steady on your display0000 Registering new handsetsLight flashes then release the button Display then shows PINSelf you want to remove To idle modeYou may need to remove a cordless handset To removeMove the cordless handset closer to the base telephone TroubleshootingTroubleshooting Troubleshooting Troubleshooting If the fault persists Guarantee and service Page Page Memory Dialling list Name