The 2410 Telephone
System Features
System Features can only be set against soft Function Keys by your System Administrator. However, your System Administrator may allocate you two ‘self administrator’ features that will enable you to add System Features to your soft Function Keys. Refer to Overview of the Function Keys for details of the System Feature that can only be allocated to you by your System Administrator.
In addition, there are a number of System Features that you can always access yourself by the use of short codes. Refer to System Features Introduction for details of System Features that you can always access yourself by dialing short codes, e.g. *17 to listen to your VoiceMail messages.
Call Appearance/Function Key Icons
The icons displayed against the Call Appearance/Feature Keys allow you to determine the status (for example, on Hold) of each call. Icons also indicate whether a feature has been activated for a particular button.
•Incoming Call: 
A 
symbol next to a call appearance key indicates an incoming call. Pressing the adjacent 
key answers the call and puts any other current call on hold.
•Connected: 
A 
symbol next to a call appearance key indicates that it is the currently connected call. The
caller's telephone number (if available) is also shown. Pressing the adjacent 
key puts the call on hold. An H is also shown on the display.
•On Hold: 
A 
symbol next to a call appearance key indicate a call on hold. Pressing the adjacent 
key takes the call off hold and puts any other current call on hold.
•Function Active: 
The button to the left or right of the function key is active.
5410/2410 Phone User Guide | Page 7 |
IP Office | Issue 3f (7th October 2005) |