AT&T 7406 manual Automatic Callback

To place a call using an	1 Press [ Pers List ] or [ Grp List ] or [ Sys List ]
AD list button or code	or Dial appropriate AD List code:
	●	List 1
	●	List 2	[dial tone]

● List 3

Note: An [ Enhcd List ] may also be available; see your

System Manager.

2Dial desired list item (1, 2, 3...)

●Call is dialed

Automatic Callback

To automatically place another call to an extension that was busy, did not answer, or returned a call waiting ringback tone

1Press [ AutoCallBk ] during call attempt

[confirmation tone]

●Green light goes on steadily until callback is completed or canceled

Note: If you send your calls to coverage after activating Automatic Callback, your callback calls will still ring at your extension and will not be redirected to coverage.

2Hang up

●You will get a 3-burst priority ring when both you and the called extension are idle; when you answer, regular ringing is sent to the called party

Note: Automatic Callback is automatically canceled after 30 minutes.

To cancel Automatic 1 Press [ AutoCallBk ] again[dial tone]

Callback

● Green light goes off

13