Speakerphone

To turn off the speaker and return to handset

1Pick up handset

●Green light next to [ Speaker Reset Spkr ] and red light next to [ Mute ] go off

●Speaker goes off

To end a call

(while handset is on-hook and only speaker is active)

1Press [ Speaker Reset Spkr ]

●Green light next to [ Speaker Reset Spkr ] and red light next to [ Mute ] go off

Note: If you are uncertain whether your voice terminal is set for the Speaker (listen-only) feature or the Speakerphone (listen and talk) feature, check with your System Manager.

Use the following procedures if your voice terminal is set for the Speakerphone (speak and listen) feature.

For directions on using the Reset Speakerphone feature, see "Reset Speakerphone" in this section.

To place/answer a call without lifting the handset,

or to use speakerphone with any feature

1Press [ Speaker Reset Spkr ]

●Green light goes on steadily

2Place or answer call, or access selected feature

3Adjust speakerphone volume if necessary

●To raise the volume, press the right half of the Volume control button labeled [ ∧ ] ;

to lower the volume, press the left half of the Volume control button labeled [ ∨ ]

●If you have a display, it shows [ SPEAKER L > > > > H ]

(There are 8 possible volume settings. On the display, 1 arrow is the lowest setting, and 8 arrows is the highest setting)

Note: The Volume control does not affect an external speakerphone attached to your voice terminal.