Select Ring (and Ringer Volume) |
|
|
✔ |
| |
|
|
|
To select a personalized ring
1Press [ Select ]
●Green light goes steadily
2Press [ Conference Ring ]
●Green light next to [ Select ] winks
●Current ring pattern plays and repeats every 4 seconds
●If you have a display, it shows
[ PERSONAL RING #x ] (x will be a number from 1 to 8)
3Continue to press [ Conference Ring ] to cycle through all 8 ring patterns
4When you hear the desired ring pattern, press [ Select ] again
●Your new ring is set; light next to [ Select ] goes off
Note: If you receive a call, go
To adjust ringer volume if necessary (speaker is not active)
1To raise the volume, press the right half of the Volume control button labeled [ ∧ ] ;
to lower the volume, press the left half of the Volume control button labeled [ ∨ ]
●If you have a display, it shows
[ RINGER L > > > > H ] (There are 8 possible volume settings. On the display, 1 arrow is the lowest setting; and 8 arrows is the highest setting)
23