AT&T 7406 manual Bridging, Call Coverage

Bridging

To answer a bridged call 1 Press [ xxxxx ] of bridged call

Note: If your terminal has Ringing Appearance Preference, this step is not necessary; you will automatically be connected to the call when you lift the handset.

To use Manual Exclusion 1 Press [ Excl xxxxx ] while connected to the call

to prevent other bridged

terminals from entering a

call (on a per call basis)

Call Coverage

Note: Pressing [ Excl xxxxx ] again reactivates

bridging.

To answer a call for a co-worker for whom you are a coverage point

1Press [ xxxxx ] of incoming call when ring begins or green light flashes

Note: The call is not at your terminal until the green light is flashing.

To leave a message for a co-worker to call the original caller’s extension

1Press [ Cvr Callbk ] while connected to the call [confirmation tone]

Note: To leave a message for a co-worker to call you, activate Leave Word Calling instead.

To talk privately with a co-worker after answering a redirected call

1 Press [ Transfer ] [dial tone]

●Call is put on hold

2 Press [ Consult ] [priority ring to co-worker]

or Dial co-worker’s extension

14