SkyLink am-100 manual Operation, Erase Control Modules, Installing Motion Sensor, Insert Battery

Page 15

HOME AUTOMATION

Operation

INSTALLATION

To turn off a light with the control panel:

1. Press the device number button on the control panel, i.e. pressing 1 will turn

1. Zone 1 Sensor 1

3. Single flash

 

off device 1, pressing 2 will turn off device 2.

2.

You will hear [Device X Off], where X is the device number.

3.

You will also see the PROG LED flashing, indicating the control panel is

 

sending out the wireless signal to control the specific device.

4.

If the receiver receives the signal, the control panel will announce [Device

 

Off Accepted].

To turn on a light with the control panel:

1.Press the number below the device number that you would like to turn on, i.e. pressing 6 will turn on device 1, pressing 7 will turn on device 2.

2.You will hear [Device X On], where X is the device number.

3.You will also see the PROG LED flashing, indicating the control panel is sending out the wireless signal to control the specific device.

4.If the receiver receives the signal, the control panel will announce [Device On Accepted].

Erase Control Modules

To erase a control module from the control panel, it is similar to learning a control module, which involves 2 parts.

1.Erase the memory of the control panel

2.Erase the memory of the control module

Part 1 Erase the memory of the Control Panel

Step

Keys

Function

Description

Note

1

[PROG]

Enter

Enter master

3 beeps for valid

[MPIN]

Programming

password to

password. 1 long beep

 

 

 

mode

programming mode for invalid password.

 

 

 

 

 

2

[0]

Select erase

 

After [0] is entered, some

 

 

control

 

zone LEDs will flash or

 

 

module

 

stay off. The zone LEDs

 

 

programming

 

represent whether that zone

 

 

 

 

is occupied by any control

 

 

 

 

module. **See Table F

3

To erase an

Select the

Refer to the table

After you have selected the

 

occupied

control module

below to select

remote location, you will

 

control module,

location you

the control

hear 3 beeps and verbal

 

press [1] to [5].

would like to

module location.

confirmation [Device X

 

 

erase

 

Empty Memory], where

 

 

 

 

X is the control module

 

 

 

 

location you have selected.

–40–

Triggered

2. Beep___Beep___

Beep___Beep___

............

Note:

-Try to mount the sensors as far away from the floor as possible to avoid damaging them. Mounting the sensors at a higher position will also result in better operating range.

-Do not mount the sensor to the exterior of the door / window, always mount the sensor to the interior side of the door / window to avoid being damaged or stolen by non-intended users.

Installing Motion Sensor

The motion sensor is most suitable for guarding a large area such as living room, family room, or bedroom. It can also be used to monitor a hallway or stairway.

Insert Battery

Undo the screw on the back of the motion sensor and remove the battery cover. Connect a 9V alkaline battery to the battery connector. Please note the polarity.

If you are planning to install the motion sensor outdoor, you should reduce the sensitivity by placing the jumper at location “2”.

For indoor application, if you want to reduce the sensitivity, you can change the jumper setting to

“2” as well.

 

Sensitivity

 

 

 

 

 

Jumper Location 1

High Sensitivity

 

 

 

 

 

 

Jumper Location 2

Low Sensitivity

 

 

 

 

 

Caution:

Depending on the environment, if you experience a false trigger when the motion sensor is placed outdoors, you should relocate it or even place it indoors. Wind blowing at a tree, or direct sunshine could cause a false trigger. Therefore, if the location at where the motion sensor is mounted could cause a false trigger, you

should change the mounting location for such sensor.

–13–

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Skylink Group Email support@skylinkhome.comHome Smart Center EMC Declaration of ConformityPage FCC Information Consumer Information ContentIntroduction System ConfigurationAccessories Introduction Accessories Installing the Console InstallationEnglish Trouble ShootingSensors FrenchQuestions Solutions Programming PasswordsChanging Passwords Order to change the password, follow the procedures belowPhone Number Programming Home AutomationEvent Trigger Testing Phone NumbersThis is not a Control MODULE, THEREFORE, should not be Installing Door / Window SensorsTesting Mounting the SensorErase Control Modules Installing Motion SensorInsert Battery OperationPart 2 Learn signal from Control Panel to Control Module Operation Alert ModePart 1 Learn signal from Control Module to Control Panel Alert Mode ExamplesTo indicate the light has been turned on MuteLearn Control Modules Send back a confirmation to the control panelArming the System Advanced Programming OperationSystem Status Erase SensorsLearn Sensors Continue Entering the premises Enter password withinAdvanced Programming Disarming the systemLearn Sensors Disarming a triggered control panelDisarming under Duress Phone Line Failure PanicSystem Failure Erase Keychain / Keypad RemotesControl Panel Low BatteryLearn Keychain / Keypad Remotes Sensor FailureKeychain Remote To enable alert zone feature, follow the instructions belowIt is recommend to enable alert zone if Advanced Programming CommunicationReceiving the Emergency Call Remote Operation by Telephone To access the control panel away from homeCalling in when you are away from home To enable auto mute feature, follow the instructions belowExample Remote Phone OperationsBeep / Alarm System Disarmed Alert ModeSystem Armed Alarm Mode
Related manuals
Manual 28 pages 6.36 Kb

am-100 specifications

The SkyLink AM-100 is an innovative satellite communication system designed to provide seamless connectivity in remote and challenging environments. This system caters to a diverse range of industries, including maritime, aviation, and disaster recovery, delivering reliable communication solutions even in the most isolated locations.

One of the standout features of the SkyLink AM-100 is its compact and lightweight design, making it easy to transport and deploy in various scenarios. Weighing less than 10 pounds, the unit allows users to establish a communication link in a matter of minutes. The system also boasts rugged construction, enabling it to withstand harsh environmental conditions and ensuring continuous operation in extreme temperatures, humidity, and dust.

The AM-100 leverages advanced satellite technologies that allow for high-speed data transmission. With a bandwidth capacity that supports voice, video, and data services, users can experience real-time communication capabilities that are critical for timely decision-making and action in emergencies or pivotal situations. The system can provide a data rate of up to 5 Mbps, ensuring that users can send and receive large files or stream video feeds without interruption.

Another key characteristic of the SkyLink AM-100 is its user-friendly interface. The system features an intuitive control panel and easily accessible connectivity ports, simplifying the setup process. Users can quickly adapt the system for various applications, whether for on-the-ground operations or aerial surveillance.

Additionally, the AM-100 is designed with multi-network support, enabling users to switch between different satellite networks for enhanced reliability. This flexibility is particularly beneficial in regions with varying network availability, ensuring continuous service and connectivity.

Security is also a major focus of the SkyLink AM-100 system. It incorporates advanced encryption protocols to protect sensitive data and communications, making it suitable for military and governmental operations.

In conclusion, the SkyLink AM-100 stands out with its robust features, including portability, high-speed data capabilities, ease of use, multi-network support, and strong security measures. It is an essential tool for professionals requiring reliable connectivity in remote locations, helping to bridge the communication gap in critical situations. Whether for disaster relief, on-site operations, or remote monitoring, the SkyLink AM-100 is poised to deliver exceptional performance and reliability.
Top Page Image Contents