Remote Operation by Telephone, Auto Mute | SkyLink am-100 instruction

COMMUNICATION

Remote Operation by Telephone

The control panel can be operated while you are away from home. You can have access to the control panel with any touch tone phone to perform a variety of operations, listed below.

-Arm

-Disarm

-Lights, Home Applicances on / off (Requires additonal Control Module)

-Garage door open / close (Requires additional Garage Door Receiver)

-System status

-Disconnect

There are 2 ways you can have access to the remote phone operation:

1.You can call the control panel when you are away from home; or

2.When the control panel calls you during emergency.

To access the control panel away from home

Calling in when you are away from home

1.Call your home phone number, or the number that the phone line of the control panel is connected to.

2.Hang up after the second ring.

3.Wait at least 10 seconds, but not more than 40 seconds, then call the phone number again.

4.The control panel will pick up the phone call and request for a valid user password, you will hear “Enter Password”. You can enter either the Master Password or Secondary Password. If the password is correct, you will hear “Password Accepted”, otherwise, you will hear “Password Failure”.

5.Once the password is accepted, you can have access to all the operations listed below.

ADVANCED PROGRAMMING

Auto Mute

When a sensor is triggered in alert mode, audio warning will be emitted, either beep or alarm. For example, if a door is opened, the beep will not stop until the door is closed. If the door is open for 2 hours, the beep will go on for 2 hours.

There are times that this is not desired. With the auto mute feature enabled, the beep will go on for only 20 seconds. After that, even if the sensor remains open, the beep will stop only the zone LED will flash to indicate the sensor is triggered. Beep will go on again if the sensor is closed and opened again.

Note: Auto Mute only functions when the control panel is in alert mode (disarmed). If the control panel is in alarm mode (armed), a triggered sensor will result in entry delay or instant alarm.

Factory Default: This feature was disabled for all zones at the factory.

To enable auto mute feature, follow the instructions below.

Step	Keys	Function	Description	Note

1	[PROG]	Enter Program-	Enter master	3 beeps for valid
	[MPIN]	ming mode	password to	password. 1 long beep
			programming mode	for invalid password.

2	[6]	Select Auto Mute		After [6] is entered, some
		Enable / Disable		zone LEDs will flash or
				stay on. This indicates
				whether Auto Mute is
				enabled or disabled.

3	Disable	Select which	Refer to the diagram	If auto mute is enabled,
	Auto Mute:	zone you would	below to select the	that zone LED will be on.
	[1] to [5]	like to enable /	appropriate setting.	If it is disabled, the LED
		disable auto mute.		will flash. You are allow
	Enable			to make multiple changes
	Auto Mute:			before terminating
	Auto Mute:			programming mode.
	[6] to [0].			programming mode.

4	[PROG]	Terminate		PROG LED will be off, and
	when	programming		you will hear 3 beeps.
	finished.	mode.

–24–

–29–

am-100 specifications

The SkyLink AM-100 is an innovative satellite communication system designed to provide seamless connectivity in remote and challenging environments. This system caters to a diverse range of industries, including maritime, aviation, and disaster recovery, delivering reliable communication solutions even in the most isolated locations.

One of the standout features of the SkyLink AM-100 is its compact and lightweight design, making it easy to transport and deploy in various scenarios. Weighing less than 10 pounds, the unit allows users to establish a communication link in a matter of minutes. The system also boasts rugged construction, enabling it to withstand harsh environmental conditions and ensuring continuous operation in extreme temperatures, humidity, and dust.

The AM-100 leverages advanced satellite technologies that allow for high-speed data transmission. With a bandwidth capacity that supports voice, video, and data services, users can experience real-time communication capabilities that are critical for timely decision-making and action in emergencies or pivotal situations. The system can provide a data rate of up to 5 Mbps, ensuring that users can send and receive large files or stream video feeds without interruption.

Another key characteristic of the SkyLink AM-100 is its user-friendly interface. The system features an intuitive control panel and easily accessible connectivity ports, simplifying the setup process. Users can quickly adapt the system for various applications, whether for on-the-ground operations or aerial surveillance.

Additionally, the AM-100 is designed with multi-network support, enabling users to switch between different satellite networks for enhanced reliability. This flexibility is particularly beneficial in regions with varying network availability, ensuring continuous service and connectivity.

Security is also a major focus of the SkyLink AM-100 system. It incorporates advanced encryption protocols to protect sensitive data and communications, making it suitable for military and governmental operations.

In conclusion, the SkyLink AM-100 stands out with its robust features, including portability, high-speed data capabilities, ease of use, multi-network support, and strong security measures. It is an essential tool for professionals requiring reliable connectivity in remote locations, helping to bridge the communication gap in critical situations. Whether for disaster relief, on-site operations, or remote monitoring, the SkyLink AM-100 is poised to deliver exceptional performance and reliability.