Furuno FS-1562-15, FS-1562-25 manual Intercom, Remote Station

Page 26

2.2 Intercom

The intercom provides communications between the FS-1562 and the RB-500 Remote Station (option). They must be wire-connected. When intercom mode is in use, there is no radio transmission.

Calling RB-500

1.Press the [0] INTERCOM key. “COM” appears on the FS-1562 display panel.

2.Press [1]*, [ENT] keys. Calling beeps on the FS-1562 sound. The buzzer stops when the handset of the RB-500 is picked up. * Designated number of the RB-500 if more than one is installed.

3.Press the PTT switch to talk. Release the switch to listen.

Call from RB-500

When the FS-1562 is called from the RB-500, the FS-1562 releases a beep. Press the [ENT] key to silence the buzzer. Press the PTT switch to talk. Release the switch to listen.

Terminating the intercom

Press the [0] INTERCOM key to terminate intercom function. “COM” disappears.

2.3 Remote Station

Priority:

The Remote Station usually has higher priority than the FS-1562. This means that operation of the FS-1562 is disabled when the handset of the RB-500 is picked up. The label “REM” appears on the FS-1562 display when the remote control unit is in operation.

Communication on 2182 kHz

When 2182 kHz is selected on the FS-1562, the FS-1562 takes priority.

However the Remote Station can control FS-1562 when you give priority to the Remote Station by system setting on the FS-1562 (ROM ver. 107 and after of FS-1562).

-2.2-

Image 26

Contents Page T 9 9 Safety Instructions Do not disassemble or modify the equipment List of Contents Features IntroductionSpecifications of MF/HF Radiotelephone model FS-1562 GeneralReceiver Operation Keys Front View of Transceiver UnitRotary controls Page Fuses Power Supply UnitAC and DC power switches Starting operation Selecting FrequencyTX Freq Standard type Netherlands type Special type YESDirect frequency entry J3ECustom channels ITU telephony channels SSBITU Telex channels Monitoring transceiver output power Tuning the antennaUsing the handset TransmittingReducing transmitter power Distress Call on 2182 kHzDistress frequencies Distress calls and Distress messageEvent of Antenna Coupler Failure DSC Distress CallingReceiving Noise blanker NB Frequency ScanSquelch control Channel scanFrequency Sweep ITU channelsOptional Devices Telex CommunicationIntercom Remote StationSetting Page Page This page is intentionally left blank Weekly Checks Diagnostic TestTesting the transmitter with a dummy antenna Page LCD/Keyboard Test & ROM Version No. Confirmation Antenna Coupler Test Competent technicians onlyMaintenance Page Troubleshooting Troubleshooting List For qualified personnel onlyTrouble Probable Cause Remedy Error Indication Replacing FusesThis page is intentionally left blank Appendix MF band working carrier frequencies ref. US CFR 47 Part MF band SSB working carrier frequencies CH noMHz ITU SSB carrier frequencies ITU RR Appendix Following frequencies are factory programmedAP.5 12/16 MHz ITU SSB carrier frequencies ITU RR Appendix AP.7 Telex Channels MF Band Telex Frequency TableMHz Band ITU Nbdp Telex Frequency Table ITU RR AppendixAP.10 AP.11 12/16 MHz Band ITU Nbdp Telex Frequency Table AP.13 18/19 MHz Band ITU Nbdp Telex Frequency Table AP.15 22, 25/26 MHz Band ITU Nbdp Telex Frequency Table