Bogen UTI312 specifications Specifications

Page 27

Specifications

Input Impedance:	600 ohms (nominal)
Input Level:	-10 dBm (nominal)
VOX Sensitivity:	-30 dBm
Background Music Input Impedance:	20K ohms
Music Input Level:	-10 dBm (nominal)
Output Level:	-10 dBm (nominal)
Output Impedance:	8 ohms
Speaker Drive Capacity:	150 per output
Timer Duration (both defeatable):	Default: 10 seconds to 990 seconds
	VOX: 1 second to 6 seconds
CPC Disconnect:	pulse greater than 300 ms
ZX3 Contact Closure:	2A @ 30V AC
	0.5A @ 125V AC
AUX Contact Closure:	2A @ 30V DC
	0.6A @ 125V AC
DC Output:	1A @ 24V DC
Voltage:	120V AC
Current:	0.75A
Temperature:	0 to 104º F
Humidity:	0 to 85% non-precipitating
Approvals:	C-UL (UL60950); FCC Part 68 Registered;
	FCC Part 15 Compliant; Industry Canada CS-03
Dimensions:	16-3/8" W x 3-1/2" H x 4-13/16" D
	19" W x 3-1/2" H x 4-13/16" D (with mounting flanges)
Product Weight:	8 lb.

27

Image 27

Contents Installation and Use Manual UL Approved Contents Introduction UTI312 Front Panel with ZX3 Installed UTI312 Callouts Panel DescriptionsZX3 Callouts Rack Mounting, Flush InstallationRack Mounting, Recessed for Wire Access Wall MountingTelephone Interface Wiring Connections & Setup Telephone System ConnectionsPBX Analog Station Port PBX Ground Start Trunk Port PBX Loop Start Trunk PortTrunk Disconnect PBX Page Port ContactPBX Page Port VOX 90V Night Ring Input Override InputBackground Music Inputs Other ConnectionsNight Ringer Contact Tone Trigger Inputs 1ZX3 AUX Contacts ZX3 Power Supply OutputZX3 Module Connections ZX3 Module Paging Output ConnectionsControls All-Call Zone Group Features & OperationZones Paging Zone GroupsTone Trigger 1 & 2 Zone Groups & Tones Auto Select Zone GroupOverride Zone Group & Tone Night Ring Zone Group & ToneConfirmation Tone Code Call Zone Group & TonesAUX Relay Contact Flexible DialingDialing Time-out TimersSetup Tone Reset Default ValuesSystem Programming Program. See the Feature Codes & Defaults chartsEcho Code Call Tone Zone GroupsCode Calling Pattern Code CallEvent Enable/Disable Event-Driven/Priority-Driven ModeDelay/No Delay Example 3 Message Playback Following Tone Priority-Driven Mode IssuesExample 1 Emergency Tone/Emergency Announcement Bypass Example 2 Strobes Flash to Announce Night RingFlexible Dialing Reference Chart Trunk Disconnect Feature Codes & DefaultsFeature Code Data Default Renumber Zone Feature Code Test Mode Specifications Block Diagram, UTI312 Block Diagram, ZX3 Limited Warranty Page Spring Street, Ramsey, NJ 07446, U.S.A