3Com 78-11069-01 manual Configuring an End-User Phone, Line Conﬁguration for End-User Phone

Page 9

Chapter 3 Preparing the Cisco CallManager and Octel Systems

Configuring Cisco CallManager

Configuring an End-User Phone

Although the DPA 7630 does not directly interact with the end-user phones, verify that you configured these phones properly to roll to voice mail. Ensure that you set the forwarding options (Forward Busy and Forward No Answer settings) to the voice mail access number for their assigned hunt group. You might want to divide users into different hunt groups to access the voice mail system. See Figure 3-3 for an example of an end-user phone configuration.

Figure 3-3 Line Conﬁguration for End-User Phone

45697

		Cisco Digital PBX Adapter 7630 Administration Guide
		Cisco Digital PBX Adapter 7630 Administration Guide
	78-11069-01			3-9
	78-11069-01			3-9

Image 9

Contents Overview of Required Tasks Preparing the Cisco CallManager and Octel SystemsTask For More Information Configuring Cisco CallManagerAdding the DPA 7630 to Cisco CallManager Using Auto-RegistrationAdding the DPA 7630 Manually Configuring the DPA Ports and Phones Configuring Call PortsOutgoing Calls Incoming Calls Line Conﬁguration for Voice Mail Ports Configuring Octel MWI PortsLine Conﬁguration for Octel MWI Ports Configuring the Virtual PortLine Conﬁguration for End-User Phone Configuring an End-User PhoneEnabling the Message Waiting Light Cisco CallManager MWI OFF SettingCisco CallManager MWI on Setting Setting Up the Voice Mail Hunt GroupSetting the Hop Count Configuring the Pilot Directory NumberSetting No-Answer Timeout Configuring the Octel SystemsAssigning Incoming, Outgoing, and MWI Lines Setting Dialing Sequence for Message Waiting Indicator