C H A P T E R 3
Preparing the Cisco CallManager and Octel Systems
Because the DPA 7630 depends on information from the Cisco CallManager and the Octel systems, you must verify that they are set up properly before configuring the DPA 7630, and you must obtain some information from these systems to set up the DPA 7630.
This guide does not contain details about configuring the Cisco CallManager and Octel systems. Refer to the documentation provided with these systems for installation and configuration instructions.
These sections provide details about the configuration requirements on the
Cisco CallManager and Octel systems:
•Configuring Cisco CallManager, page
•Configuring the Octel Systems, page
Overview of Required Tasks
Cisco CallManager recognizes the DPA 7630 as another IP telephony device. So, to add the device to the database, you need some information from the DPA 7630. Additionally, to set up the DPA 7630, you need information from both the Cisco CallManager and Octel systems. Refer to Table
|
| Cisco Digital PBX Adapter 7630 Administration Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|