3Com 78-11069-01 manual Configuring the Virtual Port, Line Conﬁguration for Octel MWI Ports

Page 8

Chapter 3 Preparing the Cisco CallManager and Octel Systems

Configuring Cisco CallManager

Figure 3-2 Line Conﬁguration for Octel MWI Ports

Configuring the Virtual Port

The DPA 7630 automatically creates and uses the virtual port to send MWI messages to Cisco CallManager. One virtual port is created regardless of the number of Octel MWI ports you have. The virtual phone settings are similar to the Octel MWI port. See Figure 3-2 for an example of the following settings:

•Directory Number—Assign a directory number to this phone.

•Call waiting—We recommend that you disable call waiting on these phones.

•Call forwarding—Do not set.

	Cisco Digital PBX Adapter 7630 Administration Guide
3-8	78-11069-01

Image 8

Contents Preparing the Cisco CallManager and Octel Systems Overview of Required TasksConfiguring Cisco CallManager Task For More InformationUsing Auto-Registration Adding the DPA 7630 to Cisco CallManagerAdding the DPA 7630 Manually Outgoing Calls Configuring the DPA Ports and PhonesConfiguring Call Ports Incoming Calls Configuring Octel MWI Ports Line Conﬁguration for Voice Mail PortsConfiguring the Virtual Port Line Conﬁguration for Octel MWI PortsConfiguring an End-User Phone Line Conﬁguration for End-User PhoneCisco CallManager MWI OFF Setting Enabling the Message Waiting LightSetting Up the Voice Mail Hunt Group Cisco CallManager MWI on SettingConfiguring the Pilot Directory Number Setting the Hop CountConfiguring the Octel Systems Setting No-Answer TimeoutSetting Dialing Sequence for Message Waiting Indicator Assigning Incoming, Outgoing, and MWI Lines