3Com 78-11069-01 manual Setting Up the Voice Mail Hunt Group, Cisco CallManager MWI on Setting

Page 11

Chapter 3 Preparing the Cisco CallManager and Octel Systems

Configuring Cisco CallManager

•MessageWaitingOnDN—Specifies the directory number to which calls from a voice mail system are directed to enable or turn on a MWI light for the specified calling party (see Figure 3-5).

Figure 3-5 Cisco CallManager MWI ON Setting

45699

Setting Up the Voice Mail Hunt Group

You must configure several settings in Cisco CallManager to ensure that the voice mail hunt groups function properly. These options appear under the Service > Service Parameters menu in Cisco CallManager: You must configure these settings for each Cisco CallManager system in a cluster.

		Cisco Digital PBX Adapter 7630 Administration Guide
		Cisco Digital PBX Adapter 7630 Administration Guide
	78-11069-01			3-11
	78-11069-01			3-11

Image 11

Contents Overview of Required Tasks Preparing the Cisco CallManager and Octel SystemsTask For More Information Configuring Cisco CallManagerAdding the DPA 7630 to Cisco CallManager Using Auto-RegistrationAdding the DPA 7630 Manually Outgoing Calls Configuring the DPA Ports and PhonesConfiguring Call Ports Incoming Calls Line Conﬁguration for Voice Mail Ports Configuring Octel MWI PortsLine Conﬁguration for Octel MWI Ports Configuring the Virtual PortLine Conﬁguration for End-User Phone Configuring an End-User PhoneEnabling the Message Waiting Light Cisco CallManager MWI OFF SettingCisco CallManager MWI on Setting Setting Up the Voice Mail Hunt GroupSetting the Hop Count Configuring the Pilot Directory NumberSetting No-Answer Timeout Configuring the Octel SystemsAssigning Incoming, Outgoing, and MWI Lines Setting Dialing Sequence for Message Waiting Indicator