Polycom 1725-16823-001 manual Configuring the Phones, Time and Date Display

Page 14

Deployment Guide for the Polycom VVX 1500 D Phone

To connect the Polycom VVX 1500 D phone to the network:

1. Clamp a ferrite clamp around the cable.

2. Connect the 25-foot Network Cable to the LAN jack on the phone.

3. Connect the other end of the 25-foot Network Cable to an available LAN port on the wall or hub/switch device port.

Note

AC power adapters are not included in the basic phone package. Using the

 

supplied network cable, the phone can be powered from a Power over Ethernet

 

(PoE) compliant switch or hub. Power over Ethernet is the default connection for

 

the phone.

 

 

Configuring the Phones

Before you can allow users to place and answer calls you must make some basic configuration changes.

This section provides information for making configuration changes for:

Time and Date Display

Browser

H.323 Protocol

Polycom CMA Provisioning

To troubleshoot any problems with the Polycom VVX 1500 D phones on the network, refer to Troubleshooting the Polycom VVX 1500 D Phone on page 3-1.

For more information on all of the configuration parameters that you can change, refer to the latest Administrator’s Guide for the Polycom UC Software at http://www.polycom.com/support/video/business_media_phones/vvx15 00d.html .

Time and Date Display

The phone maintains a local clock and calendar. Time and date can be displayed in certain operating modes such as when the phone is idle and during a call. The clock and calendar must be synchronized to a remote Simple Network Time Protocol (SNTP) timeserver. The time and date displayed on the phone will flash continuously to indicate that they are not accurate until a successful SNTP response is received. The time and date display can use one of several different formats and can be turned off.

For instructions on turning off the time and date display, refer to Polycom VVX 1500 D Display on page 3-2.

2 - 4

Image 14
Contents UC Software 3.3.1 August 2010 1725-16823-001 Rev. B Trademark Information About This Guide Deployment Guide for the Polycom VVX 1500 D Phone Contents Upgrading the Polycom VVX 1500 D Phone Software on Supported Phone Features Unsupported Phone FeaturesOverview Supported Phone Features Unsupported Phone Features Deployment Guide for the Polycom VVX 1500 D Phone Setting Up the Polycom VVX 1500 D Phone Refer to Upgrading the Phone’s Software on 00d.html Connecting the Phone to the NetworkRefer to Deploying the Phones Using a Polycom CMA System on Configuring the Phones Time and Date DisplayBrowser ProtocolPolycom VSX 7000s and VSX Setting Up the Polycom VVX 1500 D Phone Modifying Phone’s Configuration Using the Web Interface Polycom CMA ProvisioningSetting Up the Polycom VVX 1500 D Phone Enter the E164 extension into the Address field Setting Up the Provisioning Server 2345-17960-001.sip.ld Creating a Phone Configuration File Deploying Phones From the Provisioning ServerAdd contents to the phone configuration file. For example Creating a Master Configuration File Downloading the New ConfigurationUpgrading the Phone’s Software Locating the Latest SoftwareBy a Polycom CMA System on Deploying the Phones Using a Polycom CMA SystemDownloading New Software to the Phone Enabling Provisioning Using a Polycom CMA System Admininstration Settings Network Configuration CMA MenuDisabling Provisioning by a Polycom CMA System Checking the Status of the Polycom CMA System Changing VVX Specific Parameters on the Polycom CMA SystemFor example, ftp//123.45.67.89/provisioningServer Deployment Guide for the Polycom VVX 1500 D Phone Troubleshooting the Polycom VVX 1500 D Phone CallingPolycom VVX 1500 D Display EncesUpgrading the Polycom VVX 1500 D Phone Phone’s Software onDeployment Guide for the Polycom VVX 1500 D Phone Configuration Files Configuration ParametersMaster Configuration File Configuration ParametersVoIpProt Log VideoCall Sec Reg ProvSetting Up an FTP Server Miscellaneous Administrative TasksSetting Up an FTP Server Deployment Guide for the Polycom VVX 1500 D Phone