Polycom 1725-16823-001 manual Setting Up the Provisioning Server

Page 21

Setting Up the Polycom VVX 1500 D Phone

jAfter the reboot is complete, select General from the menu tab. A web page similar to the one shown below appears.

kMake the desired configuration changes.

For example, under Call Settings (scroll down on page shown above), change the Preferred Protocol for Protocol Routing to H.323 .

lIf you make any changes, scroll down to the bottom of the section.

mSelect the Submit button.

You can now instruct your users to start making H.323 calls.

Setting Up the Provisioning Server

The protocol that will be used to transfer files from the provisioning server depends on several factors including the phone model and whether the BootROM or Polycom UC Software stage of provisioning is in progress. By default, the phones are shipped with FTP enabled as the provisioning protocol.

You can use any computer on the network as the provisioning server (providing the application image and configuration files for the Polycom VVX 1500 D phone). For more information, refer to Setting Up an FTP Server on page B-1.

For organizational purposes, configuring a separate log file directory, override directory, contact directory, and license directory is recommended, but not required. The different directories can have different access permissions. For example, for LOG, CONTACTS, and OVERRIDES, allow full access (read and write) and for all others, read-only access.

2 - 11

Image 21

Contents UC Software 3.3.1 August 2010 1725-16823-001 Rev. B Trademark Information About This Guide Deployment Guide for the Polycom VVX 1500 D Phone Contents Upgrading the Polycom VVX 1500 D Phone Supported Phone Features Unsupported Phone Features OverviewSoftware on Supported Phone Features Unsupported Phone Features Deployment Guide for the Polycom VVX 1500 D Phone Setting Up the Polycom VVX 1500 D Phone Refer to Upgrading the Phone’s Software on Connecting the Phone to the Network Refer to Deploying the Phones Using a Polycom CMA System on00d.html Time and Date Display Configuring the PhonesProtocol BrowserPolycom VSX 7000s and VSX Setting Up the Polycom VVX 1500 D Phone Polycom CMA Provisioning Modifying Phone’s Configuration Using the Web InterfaceSetting Up the Polycom VVX 1500 D Phone Enter the E164 extension into the Address field Setting Up the Provisioning Server 2345-17960-001.sip.ld Deploying Phones From the Provisioning Server Creating a Phone Configuration FileAdd contents to the phone configuration file. For example Downloading the New Configuration Creating a Master Configuration FileLocating the Latest Software Upgrading the Phone’s SoftwareDeploying the Phones Using a Polycom CMA System Downloading New Software to the PhoneBy a Polycom CMA System on Admininstration Settings Network Configuration CMA Menu Enabling Provisioning Using a Polycom CMA SystemDisabling Provisioning by a Polycom CMA System Changing VVX Specific Parameters on the Polycom CMA System Checking the Status of the Polycom CMA SystemFor example, ftp//123.45.67.89/provisioningServer Deployment Guide for the Polycom VVX 1500 D Phone Calling Troubleshooting the Polycom VVX 1500 D PhoneEnces Polycom VVX 1500 D DisplayPhone’s Software on Upgrading the Polycom VVX 1500 D PhoneDeployment Guide for the Polycom VVX 1500 D Phone Configuration Parameters Configuration FilesConfiguration Parameters Master Configuration FileVoIpProt Video CallLog Sec Prov RegMiscellaneous Administrative Tasks Setting Up an FTP ServerSetting Up an FTP Server Deployment Guide for the Polycom VVX 1500 D Phone