Polycom 1725-16823-001 manual Deployment Guide for the Polycom VVX 1500 D Phone

Page 44

Deployment Guide for the Polycom VVX 1500 D Phone

7.Select Page >Shared folders to specify the server-side directory where the provisioning files will be located (and the log files uploaded).

8.Select Add and pick the directory.

9.To allow the phone to upload logs onto the provisioning server, select the Shared Folders->Files->Select Write and Delete checkboxes, and then select OK.

10.Copy the configuration files from the software download into the directory specified above.

11.Determine the IP address of the provisioning server by entering ipconfig at a command prompt to display the server network configuration.

The IP Address of the provisioning server is shown.

12.Do the following to configure the phone to point to the IP address of the server:

a Press the phone’s Menu key.

bThrough the menu, select Settings >Advanced >Admin Settings >Network Configuration.

When prompted for the administrative password, enter 456.

cScroll down to Server Menu, then press the Edit soft key.

dUsing the right arrow key, select FTP as the Server Type.

eEnter the IP address from step 11 as the Server Address, and then press the OK soft key.

fEnter the username and password from steps 5 and 6 as the Server User and Server Password.

gScroll down Save & Reboot, then press the Select soft key.

The phone will reboot.

The phone will upload two logs files to the directory specified in step 9: <MACaddress>-app.logand <MACaddress>boot.log .

B - 2

Image 44

Contents UC Software 3.3.1 August 2010 1725-16823-001 Rev. B Trademark Information About This Guide Deployment Guide for the Polycom VVX 1500 D Phone Contents Upgrading the Polycom VVX 1500 D Phone Software on Supported Phone Features Unsupported Phone FeaturesOverview Supported Phone Features Unsupported Phone Features Deployment Guide for the Polycom VVX 1500 D Phone Setting Up the Polycom VVX 1500 D Phone Refer to Upgrading the Phone’s Software on 00d.html Connecting the Phone to the NetworkRefer to Deploying the Phones Using a Polycom CMA System on Configuring the Phones Time and Date DisplayBrowser ProtocolPolycom VSX 7000s and VSX Setting Up the Polycom VVX 1500 D Phone Modifying Phone’s Configuration Using the Web Interface Polycom CMA ProvisioningSetting Up the Polycom VVX 1500 D Phone Enter the E164 extension into the Address field Setting Up the Provisioning Server 2345-17960-001.sip.ld Creating a Phone Configuration File Deploying Phones From the Provisioning ServerAdd contents to the phone configuration file. For example Creating a Master Configuration File Downloading the New ConfigurationUpgrading the Phone’s Software Locating the Latest SoftwareBy a Polycom CMA System on Deploying the Phones Using a Polycom CMA SystemDownloading New Software to the Phone Enabling Provisioning Using a Polycom CMA System Admininstration Settings Network Configuration CMA MenuDisabling Provisioning by a Polycom CMA System Checking the Status of the Polycom CMA System Changing VVX Specific Parameters on the Polycom CMA SystemFor example, ftp//123.45.67.89/provisioningServer Deployment Guide for the Polycom VVX 1500 D Phone Troubleshooting the Polycom VVX 1500 D Phone CallingPolycom VVX 1500 D Display EncesUpgrading the Polycom VVX 1500 D Phone Phone’s Software onDeployment Guide for the Polycom VVX 1500 D Phone Configuration Files Configuration ParametersMaster Configuration File Configuration ParametersVoIpProt Log VideoCall Sec Reg ProvSetting Up an FTP Server Miscellaneous Administrative TasksSetting Up an FTP Server Deployment Guide for the Polycom VVX 1500 D Phone