Polycom 1725-16823-001 manual Modifying Phone’s Configuration Using the Web Interface

Page 18

Deployment Guide for the Polycom VVX 1500 D Phone

Polycom CMA Provisioning

Only one phone line associated with a Polycom CMA system can be provisioned on a VVX 1500 D phone, but the line key associated with that line is configurable. For detailed information on configuration file settings, refer to <prov/> on page A-6.

Modifying Phone’s Configuration Using the Web Interface

You can make changes to the phone’s configuration through the web interface to the phone. The factory default username and password for the web interface is Polycom and 456 respectively (the username is case sensitive).

Note

Blind transfer, call recording, picture frame, corporate directory (LDAP Integration),

 

and phone server redundancy cannot be enabled/disabled through the web

 

interface. You cannot change the displayed language through the web interface.

 

You must make changes for these features through the configuration files. Refer to

 

Deploying Phones From the Provisioning Server on page 2-13.

Note

 

 

Changes made through the web interface are written to the override file (highest

 

priority). These changes remain active until Settings > Advanced > Admin

 

Settings> Reset to Default > Reset Local Config... is performed.

 

 

To configure the phone through the web interface:

>>Using your chosen browser, do the following:

a To get the phone’s IP address, press the Menu key, and then selecting Status > Platform > Phone. Scroll down to see the IP address.

2 - 8

Image 18
Contents UC Software 3.3.1 August 2010 1725-16823-001 Rev. B Trademark Information About This Guide Deployment Guide for the Polycom VVX 1500 D Phone Contents Upgrading the Polycom VVX 1500 D Phone Supported Phone Features Unsupported Phone Features OverviewSoftware on Supported Phone Features Unsupported Phone Features Deployment Guide for the Polycom VVX 1500 D Phone Setting Up the Polycom VVX 1500 D Phone Refer to Upgrading the Phone’s Software on Connecting the Phone to the Network Refer to Deploying the Phones Using a Polycom CMA System on00d.html Configuring the Phones Time and Date DisplayBrowser ProtocolPolycom VSX 7000s and VSX Setting Up the Polycom VVX 1500 D Phone Modifying Phone’s Configuration Using the Web Interface Polycom CMA ProvisioningSetting Up the Polycom VVX 1500 D Phone Enter the E164 extension into the Address field Setting Up the Provisioning Server 2345-17960-001.sip.ld Creating a Phone Configuration File Deploying Phones From the Provisioning ServerAdd contents to the phone configuration file. For example Creating a Master Configuration File Downloading the New ConfigurationUpgrading the Phone’s Software Locating the Latest SoftwareDeploying the Phones Using a Polycom CMA System Downloading New Software to the PhoneBy a Polycom CMA System on Enabling Provisioning Using a Polycom CMA System Admininstration Settings Network Configuration CMA MenuDisabling Provisioning by a Polycom CMA System Checking the Status of the Polycom CMA System Changing VVX Specific Parameters on the Polycom CMA SystemFor example, ftp//123.45.67.89/provisioningServer Deployment Guide for the Polycom VVX 1500 D Phone Troubleshooting the Polycom VVX 1500 D Phone CallingPolycom VVX 1500 D Display EncesUpgrading the Polycom VVX 1500 D Phone Phone’s Software onDeployment Guide for the Polycom VVX 1500 D Phone Configuration Files Configuration ParametersMaster Configuration File Configuration ParametersVoIpProt Video CallLog Sec Reg ProvMiscellaneous Administrative Tasks Setting Up an FTP ServerSetting Up an FTP Server Deployment Guide for the Polycom VVX 1500 D Phone