Polycom SX-200 ICP, 72-1084-02, Mitel Networks 3300 manual Continuous Short Pulse Long Pulse

SpectraLink Corporation	Configuration and Administration—NetLink e340/i640 Wireless Telephone
	Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

Ring Cadence The cadence is the rhythm of the ring. It may be set to a pre- programmed ring cadence or it may be set to obtain its cadence from the Call Agent. The PBX option is designed to utilize any distinctive rings sent by the Call Agent while allowing the user to set unique rings for auxiliary applications.

Off: silent

Off

PBX

Continuous

Short Pulse

Long Pulse

OK Up

PBX: Call Agent determines ring cadence (e.g. the Call Agent may send rings that differentiate between internal and external calls.)

Continuous: rings continually until answered

Short Pulse: rings in short bursts

Long Pulse: rings in long bursts

Ring Tone select from five available tones (scroll to Tone 5 option). The Play softkey allows the user to preview the tone before selecting. If Ring Cadence is turned off, the Ring Tone option will not appear on the menu.

Tone 1

Tone 2

Tone 3

Tone 4

Tone 5

OK Play Up

Ring Volume NetLink i640 Wireless Telephone only. The user may select a volume level by pressing the Up and Down side buttons and then pressing the OK softkey. The graduated volume bar indicates the levels. This setting may be overridden by adjusting volume while the handset is ringing.

Vibrate Cadence Vibrate Cadence options are the same as for Ring Cadence

Ring Delay Ring Delay determines how long the vibrate cadence will play before the audible ring starts. If Ring Cadence and Vibrate Cadence are turned off, the Ring Delay option will not appear on the menu.

No Delay

5 Second Delay

10 Second Delay

OK UP

PN: 72-1084-02-G.doc Page 28