Polycom SX-200 ICP, 72-1084-02, Mitel Networks 3300 manual Quick Start Guide

Page 7

SpectraLink Corporation

Configuration and Administration—NetLink e340/i640 Wireless Telephone

 

Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

2.2Quick Start Guide

1.A wireless LAN must be properly configured and operational through the use of 802.11b APs listed on the NetLink Wireless Telephone Access Point Compatibility matrix.

2.A TFTP server must be available on the network in order to load the appropriate software into the NetLink Wireless Telephones. See the License Management section for detailed instructions for loading software on NetLink Wireless Telephones.

3.The supported Mitel Networks VoIP solution must be connected to your network and completely operational.

4.The NetLink SVP Server, which facilitates the QoS on the wireless LAN for the NetLink Wireless Telephones, must be on the same subnet as the NetLink Wireless Telephones and have the proper versions of software.

Ensure you have the following versions for the SVP Server:

173svp100.toc

174zvmlinux

175flashfs

5.Visit http://www.polycom.com/usa/en/support/voice/wi-fi/wi-fi.html to download the latest NetLink Wireless Telephone and any updates to the NetLink SVP Server software.

6.Install the correct NetLink Wireless Telephone software and any updates to the NetLink SVP Server software per Section 5.2 Configuration Process for the NetLink Wireless Telephones and per NetLink SVP Server Installation, Setup and Maintenance section 6.1 Software Updates for the NetLink SVP Server. Ensure the software is properly loaded on the TFTP server.

7.Configure your NetLink Wireless Telephone to ensure that it is associated with the wireless LAN, has the appropriate software, and has the correct IP address for the supported Mitel Networks IP telephony system. See the License Management section and the NetLink Wireless Telephone Configuration section for detailed instructions for loading software onto and configuring NetLink Wireless Telephones.

IP multicast addresses are used by the NetLink i640 Wireless Telephone. This requires that multicasting be enabled on the subnet used for the NetLink Wireless Telephones and SVP Server.

Routers are typically configured with filters to prevent multicast traffic from flowing outside of specific domains. The wireless LAN can be placed on a separate VLAN or subnet to reduce the effects of broadcast and multicast traffic from devices in other network segments.

PN: 72-1084-02-G.doc

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Configuration and Administration NetLink e340/h340/i640 Wireless TelephoneMitel Networks 3300 and SX-200 ICP Contact Information Trademark InformationPatent Information Copyright NoticeTable of Contents Referenced Documents About This DocumentCustomer Support Hotline Gateway Icons and ConventionsQoS and Security NetLink e340/h340/i640 Wireless Telephone OverviewQuick Start Guide Mitel Networks IP telephony server architecture example System DiagramSystem Components SpectraLink Corporation DHCP, Tftp NetLink Wireless TelephoneSpecifications WPA2-PSKDisplay Ringing and tones Audio featuresIcon Icons shown in bold turns off when Startup SequenceEXT Active off-hook Handset ModesStandby on-hook PredialMenu display NetLink Wireless Telephone DisplaysStatus display area Line displayAdmin Menu NetLink Wireless Telephone ConfigurationOpening the Admin Menu Alphanumeric string entry Entering and editing Admin menu optionsTo Enter Press WEP Admin menuAdmin Menu Items 2nd Level 3rd Level 4th Level 5th Level ESS IDAdmin Menu Items 2nd Level 3rd Level Push-to-talk Essid Select either WEP Off or WEP On North America Europe except Spain and France Japan channels PBX User-defined PreferencesStandby menu Standby menu item Nd Level Rd Level Th Level4th Level Standby menu item 2nd Level 3rd Level Telephone Ring Auxiliary Ring Continuous Short Pulse Long Pulse Phone Options Channel Enable/Disable Audio Volume Tone V olume License Management Configuration ProcessRequirements SpectraLink Corporation Option Meaning Voice messaging accessMitel Networks VoIP Integration Factors CODECsSpectraLink Corporation Feature Programming 5220 key Feature Handset Shortcut Key Sequence Feature AssignmentFCN + Feature list Feature AccessLine appearances Hot desking SuperkeyResiliency Paging Testing a Handset Run Site Survey Diagnostic Tools7 b c Solving coverage issues Diagnostics ModeScreen M m m Screen Message type Errors Events Full Syslog ModeAP MAC MACConducting a Site Survey Certifying the NetLink Wireless TelephonesMessage Description Software MaintenanceUpgrading NetLink Wireless Telephones Normal download messagesDownload failure or recovery messages Access Point Problems Troubleshooting NetLink Wireless Telephone ProblemsConfiguration Problems Message Description Action NetLink Wireless Telephone Status MessagesMessage Description Action Do not Power OFF PBX Dhcp Configuration NoteLAN Message Description Action Maintenance Index
Top Page Image Contents