Polycom Mitel Networks 3300, 72-1084-02, SX-200 ICP manual SpectraLink Corporation

Page 32

SpectraLink Corporation

Configuration and Administration—NetLink e340/i640 Wireless Telephone

 

Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

each time it powers on. See NetLink Wireless Telephone Configuration section for detailed configuration instructions.

6.Power cycle the handset.

7.The MiNET code will now download to the handset. The status bar will increment fully across the display for each function that is being performed in the download process. Upon completion of the update process, the handset will re-boot with the new firmware.

8.If the handset is statically configured, you may now enter the SVP IP address and RTC address as detailed in the NetLink Wireless Telephone Configuration section above.

9.Register the handset with the supported Mitel Networks VoIP solution as if it were a SpectraLink NetLink phone and properly label the handset with the appropriate extension.

For future software upgrades, simply update the files that are stored on the TFTP server. Each time the handset is powered up, it will check with the TFTP server to ensure it has the proper software version.

PN: 72-1084-02-G.doc

Page 32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Mitel Networks 3300 and SX-200 ICP NetLink e340/h340/i640 Wireless TelephoneConfiguration and Administration Trademark Information Patent InformationCopyright Notice Contact InformationTable of Contents Customer Support Hotline About This DocumentReferenced Documents Icons and Conventions GatewayNetLink e340/h340/i640 Wireless Telephone Overview QoS and SecurityQuick Start Guide System Diagram Mitel Networks IP telephony server architecture exampleSystem Components SpectraLink Corporation NetLink Wireless Telephone SpecificationsWPA2-PSK DHCP, TftpDisplay Audio features Ringing and tonesEXT Startup SequenceIcon Icons shown in bold turns off when Handset Modes Standby on-hookPredial Active off-hookNetLink Wireless Telephone Displays Status display areaLine display Menu displayOpening the Admin Menu NetLink Wireless Telephone ConfigurationAdmin Menu To Enter Press Entering and editing Admin menu optionsAlphanumeric string entry Admin menu Admin Menu Items 2nd Level 3rd Level 4th Level 5th LevelESS ID WEPAdmin Menu Items 2nd Level 3rd Level Push-to-talk Essid Select either WEP Off or WEP On North America Europe except Spain and France Japan channels User-defined Preferences Standby menuStandby menu item Nd Level Rd Level Th Level PBX4th Level Standby menu item 2nd Level 3rd Level Telephone Ring Auxiliary Ring Continuous Short Pulse Long Pulse Phone Options Channel Enable/Disable Audio Volume Tone V olume Requirements Configuration ProcessLicense Management SpectraLink Corporation Voice messaging access Mitel Networks VoIP Integration FactorsCODECs Option MeaningSpectraLink Corporation Feature Programming FCN + Feature Assignment5220 key Feature Handset Shortcut Key Sequence Line appearances Feature AccessFeature list Resiliency SuperkeyHot desking Paging Testing a Handset Diagnostic Tools Run Site Survey7 b c Screen Diagnostics ModeSolving coverage issues M m m Screen Syslog Mode Message type Errors Events FullMAC AP MACCertifying the NetLink Wireless Telephones Conducting a Site SurveySoftware Maintenance Upgrading NetLink Wireless TelephonesNormal download messages Message DescriptionDownload failure or recovery messages Configuration Problems Troubleshooting NetLink Wireless Telephone ProblemsAccess Point Problems NetLink Wireless Telephone Status Messages Message Description ActionMessage Description Action Do not Power OFF PBX Configuration Note DhcpLAN Message Description Action Maintenance Index
Top Page Image Contents