Polycom Mitel Networks 3300, 72-1084-02, SX-200 ICP manual Diagnostic Tools, Run Site Survey

Page 41

SpectraLink Corporation

Configuration and Administration—NetLink e340/i640 Wireless Telephone

 

Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

9.Diagnostic Tools

Run Site Survey, Diagnostic Mode and Syslog Mode are three diagnostic tools provided to assist the WLAN administrator in evaluating the functioning of the NetLink Wireless Telephone and the system surrounding it. Diagnostic Tools are enabled in the Admin menu.

9.1Run Site Survey

Site Survey is used to evaluate the facility coverage before certifying that an installation is complete. It can also be used at any time to evaluate coverage by testing signal strength, to gain information about an AP, and to scan an area to look for all APs regardless of ESSID. The information available through site survey includes:

•ESSID

•Beacon Interval

•Information regarding support of 802.11d, 802.11g, 802.11h, and other 802.11 amendment standards as required.

•Current security configuration

Start the site survey by selecting Run Site Survey from the Admin menu. The mode starts immediately.

When the test is started, it is by default in “single ESSID” mode. When the Any soft key is pressed (softkey A), all APs, regardless of ESSID are displayed, and the softkey changes to say MyID. Pressing the MyID soft key will revert to the “single ESSID” mode and change the softkey back to Any.

The display would look like the following for the multiple AP mode.

1

1

1

1

1

1

- 2

2

3

3

4

4

4

1

1

1

1

1

1

- 2

2

3

3

4

4

4

1

1

1

1

1

1

-

2

2

3

3

4

4

4

1

1

1

1

1

1

-

2

2

3

3

4

4

4

A

n

y

 

 

 

 

 

 

 

 

D

e

t l

Where:

•111111 = The last three octets of the on-air MAC address for a discovered AP.

•22 = The signal strength for the specified AP.

•33 = The channel number of the specified AP.

•444 = The beacon interval configured on the specified AP.

•Any/MyID = Softkey to toggle between “single ESSID” and “any ESSID” mode.

•Detl/Smry = Softkey to toggle between the multiple AP (summary) display, and the single (detail) displays for each AP.

The following screen shows how the display would look when there are three APs configured with an ESSID that matches that of the handset. The first has a signal strength of –28dbm, is configured on channel 2, with a beacon interval of 100ms. The second has a signal strength of –48dbm, is configured on channel 6, with a

PN: 72-1084-02-G.doc

Page 41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Mitel Networks 3300 and SX-200 ICP NetLink e340/h340/i640 Wireless TelephoneConfiguration and Administration Patent Information Trademark InformationCopyright Notice Contact InformationTable of Contents Customer Support Hotline About This DocumentReferenced Documents Gateway Icons and ConventionsQoS and Security NetLink e340/h340/i640 Wireless Telephone OverviewQuick Start Guide Mitel Networks IP telephony server architecture example System DiagramSystem Components SpectraLink Corporation Specifications NetLink Wireless TelephoneWPA2-PSK DHCP, TftpDisplay Ringing and tones Audio featuresEXT Startup SequenceIcon Icons shown in bold turns off when Standby on-hook Handset ModesPredial Active off-hookStatus display area NetLink Wireless Telephone DisplaysLine display Menu displayOpening the Admin Menu NetLink Wireless Telephone ConfigurationAdmin Menu To Enter Press Entering and editing Admin menu optionsAlphanumeric string entry Admin Menu Items 2nd Level 3rd Level 4th Level 5th Level Admin menuESS ID WEPAdmin Menu Items 2nd Level 3rd Level Push-to-talk Essid Select either WEP Off or WEP On North America Europe except Spain and France Japan channels Standby menu User-defined PreferencesStandby menu item Nd Level Rd Level Th Level PBX4th Level Standby menu item 2nd Level 3rd Level Telephone Ring Auxiliary Ring Continuous Short Pulse Long Pulse Phone Options Channel Enable/Disable Audio Volume Tone V olume Requirements Configuration ProcessLicense Management SpectraLink Corporation Mitel Networks VoIP Integration Factors Voice messaging accessCODECs Option MeaningSpectraLink Corporation Feature Programming FCN + Feature Assignment5220 key Feature Handset Shortcut Key Sequence Line appearances Feature AccessFeature list Resiliency SuperkeyHot desking Paging Testing a Handset Run Site Survey Diagnostic Tools7 b c Screen Diagnostics ModeSolving coverage issues M m m Screen Message type Errors Events Full Syslog ModeAP MAC MACConducting a Site Survey Certifying the NetLink Wireless TelephonesUpgrading NetLink Wireless Telephones Software MaintenanceNormal download messages Message DescriptionDownload failure or recovery messages Configuration Problems Troubleshooting NetLink Wireless Telephone ProblemsAccess Point Problems Message Description Action NetLink Wireless Telephone Status MessagesMessage Description Action Do not Power OFF PBX Dhcp Configuration NoteLAN Message Description Action Maintenance Index
Top Page Image Contents