Polycom 300 Answering Calls, Controlling Audio, Answering Video Calls, Answering Audio Calls

Polycom OTX 300 User Guide

Answering Calls

This section describes how to answer video or audio calls that you receive when in an OTX room.

Answering Video Calls

When you receive a video call, you hear a ringing sound.

To answer a video call:

>>You do not have to do anything to answer the call. The call will be automatically answered by the OTX.

Answering Audio Calls

When you receive an audio call, you hear a ringing sound and the Touch Panel automatically displays the Home screen for the Enhanced UI (shown in Figure 2-2) or the Audio Dial screen for the Classic UI (shown in Figure 2-22)so that you can easily answer the call.

To answer an audio call:

>>Touch Dial/Answer.

Controlling Audio

When you place a video call, the audio level defaults to the volume it was set at the last time the OTX was used. A horizontal bar on the Touch Panel shows the audio level. You can change the audio in these ways:

•	During both video and audio calls, touch		Volume Up or
	Volume Down to increase or decrease the sound you hear from the far
	end.
•	During both video and audio calls, touch		Mute to mute or unmute
	the sound you are sending from your site.
	If the far end is muted, the	Far End Muted icon appears on the Home
	screen.

2–30