Chapter 1 — Using the CN2G Handheld Computer
Using the Keypad
The CN2G has a
Power |
| Arrow |
key |
| keys (4) |
| ESC | Enter key |
| ENTER |
|
Shift key
Scan button
CN2G Keypad
The Shift ( B ) key lets you access the additional functions printed on the keypad overlay.
To access functions printed on the keypad overlay
1Press and release the Shift key. The B icon turns on and Shift mode is enabled.
2Press and release the second key to access the function printed above a key. For example, press the F1 key to access the F3 function. The B icon turns off.
If you do not press another key within 3 seconds of pressing the Shift key, the B icon turns off and Shift mode is disabled.
Using the Power Key
When you press the Power key to turn off the CN2G, you actually put the CN2G in Suspend mode. In Suspend mode, the CN2G continues to supply power to all memory, but turns off power to most hardware. This
When you press the Power key to turn the CN2G back on, your computer resumes where it was when you turned it off. If you are using WPA or 802.1x security, the computer may need to reauthenticate before it starts your application.
8 | CN2G Handheld Computer User’s Manual |