Chapter 2 — Configuring the CN2G
To use wireless communications in a TCP/IP network
1Configure these network parameters on each CN2G in the network:
•Infrastructure mode (set to Infrastructure by default)
•Network name (SSID)
•Host IP address
•IP settings (if not using DHCP)
•Network port
2Configure security. For help, see “Configuring Security” on page 33.
The easiest way to configure the network parameters on the CN2G is to use Intermec Settings. For help, see “Configuring the CN2G Locally With Intermec Settings” on page 24.
CN2G Handheld Computer User’s Manual | 31 |