Intermec user manual Understanding the Beeps, Scanning Bar Codes, Understanding the CN2G Beeps

Page 27

Chapter 1 — Using the CN2G Handheld Computer

Understanding the Beeps

The CN2G uses beeps to provide you with audio feedback when it performs some functions. For example, you hear a beep each time you scan a valid bar code.

Understanding the CN2G Beeps

Beep Sequence

What it Means

High beep, low

You entered valid data or a valid command, the

beep

CN2G decoded a label, or the CN2G decoded

 

the last row of a two-dimensional bar code.

 

 

Error beep

You entered or scanned an invalid command.

 

Try entering or scanning the command again.

 

 

Click

You pressed a key.

 

 

You can change the beeper volume for your needs and environment. You can set the beeper volume to off, low (quiet), medium, high (loud), and very high (very loud – default setting).

To change the beeper volume

1From the Start menu, choose Intermec Settings.

2Go to Device Settings > Beeper > Volume.

3Select a volume level, save your changes, and exit Intermec Settings.

Scanning Bar Codes

Use the scanner to scan and enter bar code data. The CN2G supports the scanning of 1D linear bar codes. When you unpack the CN2G, these bar code symbologies are enabled:

Code 39

Code 128

UPC/EAN

CN2G Handheld Computer User’s Manual

15

Image 27
Contents CN2G Handheld Computer CN2G Handheld Computer User’s Manual Version Date Description of Change Document Change RecordCN2G Handheld Computer User’s Manual Contents Contents Troubleshooting and Maintaining the CN2G Contents Viii Before You Begin Safety SummaryWeb Support Safety IconsGlobal Services and Support Warranty InformationTelephone Support Who Should Read This Document?Related Documents Patent InformationRegex++, Index. Version 3.31, 16th Dec Other Copyright InformationUsing the CN2G Handheld Computer Introducing the CN2G Handheld Computer What’s New? Using the BatteryTo install and charge the battery Installing and Charging the BatteryBattery To remove the battery Removing the BatteryIcon Status Maximizing Battery LifeChecking the Battery Status Battery Icon StatusUsing the Keypad Using the Power KeyTo access functions printed on the keypad overlay Using the Touch Screen Using the Touch Screen and StylusTo turn off the CN2G To open ScanDemo Using ScanDemoUnderstanding the Desktop Functions You Can Perform With the StylusTo enable or disable symbologies Using Transcriber Icon Description Understanding the Screen IconsCalibrating the Screen CN2G Screen IconsLight Color Description Understanding the Status LightsTo calibrate the screen Understanding the CN2G Status LightsUnderstanding the CN2G Beeps To change the beeper volumeUnderstanding the Beeps Scanning Bar CodesTo scan a bar code label with the CN2G 123456To remove the SD card Using the SD CardTo insert the SD card Install the battery door Using the CN2G Handheld Computer Configuring the CN2G Use Setup Assistant Use Intermec Settings Remotely How to Configure the CN2G ParametersConfiguring the CN2G With the Setup Assistant To open Intermec Settings Configuring the CN2G Locally With Intermec SettingsConfiguring the CN2G To Perform This Function Do This Restoring Default SettingsNavigating in Intermec Settings To restore default settingsConfiguring the CN2G Remotely With Intermec Settings Exiting Intermec SettingsTo exit Intermec Settings Configuring USB Communications Configuring the CN2G For Your NetworkTo use USB communications with your CN2G Configuring 802.11b/g Radio CommunicationsConfiguring the Network Parameters for a TCP/IP Network To use wireless communications in a TCP/IP network Configuring the Network Parameters for a UDP Plus Network To use wireless communications in a UDP Plus network Configuring SecurityChoosing Between Microsoft and Funk Security Selecting Funk as Your Security ChoiceTo select Funk security as your security choice To select a profile for Funk security Selecting a Profile for Funk SecurityUsing WPA Security For Authentication, choose TTLS, PEAP, or TLS and tap Save Configuring WPA Security With Funk SecurityFor Authentication, choose None and tap Save To enable WPA-PSK security on your CN2G with Funk securityConfiguring WPA Security With Microsoft Security Configuring the CN2G Using 802.1x Security Configuring 802.1x Security With Funk Security Configuring 802.1x Security With Microsoft Security Using Leap Security To enable Leap security on your CN2G Using Static WEP SecurityConfiguring Static WEP Security With Microsoft Security Configuring Static WEP Security With Funk SecuritySelect Enroll Certificates and tap the Run App button Loading CertificatesConfiguring the CN2G Configuring the CN2G Disabling Security To disable securityDeveloping and Installing Applications Developing a New Application Developing Applications for the CN2GInstalling Applications on the CN2G Developing a Web-Based ApplicationTo open Microsoft Internet Explorer Installing ActiveSync and Establishing a Partnership Installing Applications Using ActiveSyncTo install ActiveSync and establish a partnership Using ActiveSync to Copy Files and Install Applications To install an application on the CN2G using ActiveSync To use Avalanche to remotely manage the CN2G Installing Applications Using Your SD CardInstalling Applications Using Wavelink Avalanche To install applications using the SD cardUpgrading the Operating System Upgrading the Operating System Using an SD CardLaunching Your Application Automatically Upgrading Your CN2GTo upgrade the operating system To remotely upgrade a CN2G using Intermec Settings Upgrading the Persistent Storage Manager Files To upgrade the PSM filesDeveloping and Installing Applications Developing and Installing Applications Troubleshooting and Maintaining the CN2G Solution Problems and SolutionsProblems While Operating the CN2G ProblemProblems While Operating the CN2G Problems While Configuring SecurityProblems While Configuring Security Problem Solution Problems With Wireless ConnectivityYou may have gone out of range of an access point Problems With Wireless ConnectivityProblems While Scanning Bar Codes Problems While Scanning Bar Codes Booting the CN2G Warm Booting the CN2GTo warm boot the CN2G using the Warm Boot button Cold Booting the CN2G To warm boot the CN2G using the Power keyTo cold boot the CN2G To clean the scanner window Cleaning the Scanner Window and CN2G ScreenTroubleshooting and Maintaining the CN2G Appendix Physical and Environmental Specifications Accessories for the CN2G Default Configuration Default Scanner ConfigurationDefault Communications Configuration Name Servers Settings Default Value Radio Settings Default ValueUDP Plus Settings Default Value Device Settings Default Value Default Device Settings ConfigurationIndex CN2G Symbols and NumbersManual Index TCP/IP Index Page 074751-002