Intermec CN2G Understanding the Status Lights, To calibrate the screen, Light Color Description

Page 26

Chapter 1 — Using the CN2G Handheld Computer

To calibrate the screen

1Press and hold B, and then press U. The calibration screen appears.

2Follow the instructions to calibrate the screen.

Understanding the Status Lights

The status lights on the CN2G turn on to indicate the status of the battery or a successful decode of a bar code.

Battery	Good Read
light	light
	CN2

CN2G Status Lights: This illustration shows the location of the Battery and

Good Read lights.

Understanding the CN2G Status Lights

Light	Color	Description
Good Read	Green	This light turns on when the CN2G
		successfully decodes a bar code.
	Red	This light turns on when you press the
		Scan button or one of the Side Scan
		buttons.

Battery	Green	When the CN2G is connected to a power
		source, this light turns on to indicate that
		the battery is fully charged.
	Orange	When the CN2G is connected to a power
		source, this light turns on if you cannot
		charge the battery. The temperature may
		not be within the charging range, or the
		battery may be damaged.
	Red	When the CN2G is connected to a power
		source, this light turns on to indicate that
		the battery is charging.

14	CN2G Handheld Computer User’s Manual

Image 26

Contents CN2G Handheld Computer CN2G Handheld Computer User’s Manual Document Change Record Version Date Description of ChangeCN2G Handheld Computer User’s Manual Contents Contents Troubleshooting and Maintaining the CN2G Contents Viii Safety Summary Before You BeginWarranty Information Safety IconsGlobal Services and Support Web SupportPatent Information Who Should Read This Document?Related Documents Telephone SupportOther Copyright Information Regex++, Index. Version 3.31, 16th DecUsing the CN2G Handheld Computer Introducing the CN2G Handheld Computer Using the Battery What’s New?Installing and Charging the Battery To install and charge the batteryBattery Removing the Battery To remove the batteryBattery Icon Status Maximizing Battery LifeChecking the Battery Status Icon StatusTo access functions printed on the keypad overlay Using the KeypadUsing the Power Key To turn off the CN2G Using the Touch ScreenUsing the Touch Screen and Stylus Functions You Can Perform With the Stylus Using ScanDemoUnderstanding the Desktop To open ScanDemoTo enable or disable symbologies Using Transcriber CN2G Screen Icons Understanding the Screen IconsCalibrating the Screen Icon DescriptionUnderstanding the CN2G Status Lights Understanding the Status LightsTo calibrate the screen Light Color DescriptionScanning Bar Codes To change the beeper volumeUnderstanding the Beeps Understanding the CN2G Beeps123456 To scan a bar code label with the CN2GUsing the SD Card To remove the SD cardTo insert the SD card Install the battery door Using the CN2G Handheld Computer Configuring the CN2G How to Configure the CN2G Parameters Use Setup Assistant Use Intermec Settings RemotelyConfiguring the CN2G With the Setup Assistant Configuring the CN2G Locally With Intermec Settings To open Intermec SettingsConfiguring the CN2G To restore default settings Restoring Default SettingsNavigating in Intermec Settings To Perform This Function Do ThisTo exit Intermec Settings Configuring the CN2G Remotely With Intermec SettingsExiting Intermec Settings Configuring the CN2G For Your Network Configuring USB CommunicationsConfiguring 802.11b/g Radio Communications To use USB communications with your CN2GConfiguring the Network Parameters for a TCP/IP Network To use wireless communications in a TCP/IP network Configuring the Network Parameters for a UDP Plus Network Configuring Security To use wireless communications in a UDP Plus networkTo select Funk security as your security choice Choosing Between Microsoft and Funk SecuritySelecting Funk as Your Security Choice Selecting a Profile for Funk Security To select a profile for Funk securityUsing WPA Security Configuring WPA Security With Funk Security For Authentication, choose TTLS, PEAP, or TLS and tap SaveTo enable WPA-PSK security on your CN2G with Funk security For Authentication, choose None and tap SaveConfiguring WPA Security With Microsoft Security Configuring the CN2G Using 802.1x Security Configuring 802.1x Security With Funk Security Configuring 802.1x Security With Microsoft Security Using Leap Security Using Static WEP Security To enable Leap security on your CN2GConfiguring Static WEP Security With Funk Security Configuring Static WEP Security With Microsoft SecurityLoading Certificates Select Enroll Certificates and tap the Run App buttonConfiguring the CN2G Configuring the CN2G To disable security Disabling SecurityDeveloping and Installing Applications Developing Applications for the CN2G Developing a New ApplicationTo open Microsoft Internet Explorer Installing Applications on the CN2GDeveloping a Web-Based Application Installing Applications Using ActiveSync Installing ActiveSync and Establishing a PartnershipTo install ActiveSync and establish a partnership Using ActiveSync to Copy Files and Install Applications To install an application on the CN2G using ActiveSync To install applications using the SD card Installing Applications Using Your SD CardInstalling Applications Using Wavelink Avalanche To use Avalanche to remotely manage the CN2GUpgrading Your CN2G Upgrading the Operating System Using an SD CardLaunching Your Application Automatically Upgrading the Operating SystemTo upgrade the operating system To remotely upgrade a CN2G using Intermec Settings To upgrade the PSM files Upgrading the Persistent Storage Manager FilesDeveloping and Installing Applications Developing and Installing Applications Troubleshooting and Maintaining the CN2G Problem Problems and SolutionsProblems While Operating the CN2G SolutionProblems While Configuring Security Problems While Operating the CN2GProblems While Configuring Security Problems With Wireless Connectivity Problem SolutionProblems With Wireless Connectivity You may have gone out of range of an access pointProblems While Scanning Bar Codes Problems While Scanning Bar Codes To warm boot the CN2G using the Warm Boot button Booting the CN2GWarm Booting the CN2G To cold boot the CN2G Cold Booting the CN2GTo warm boot the CN2G using the Power key Cleaning the Scanner Window and CN2G Screen To clean the scanner windowTroubleshooting and Maintaining the CN2G Appendix Physical and Environmental Specifications Accessories for the CN2G Default Communications Configuration Default ConfigurationDefault Scanner Configuration UDP Plus Settings Default Value Name Servers Settings Default ValueRadio Settings Default Value Default Device Settings Configuration Device Settings Default ValueIndex Symbols and Numbers CN2GManual Index TCP/IP Index Page 074751-002