NEC ND-70895 (E) system manual Example IP Address, Example Subnet Mask

COMMANDS

ASYDL

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX								SYSTEM DATA CONTENTS
TYPE		00 – FF
	(INDEX)
(SYS)		(Hex)	DATA
	512-1535				BIT
			0/1
					b0	Fusion Point Code (FPC) of self node in hexadecimal.
						FPC 1-253 (01 Hex-FD Hex)
					b1
					b2
	512				b3	Note: After assigning/changing the FPC, System Initialization (Non-
					b4			Load Initialization) is required.
					b5
					b6
					b7
					b0	Local Data Memory (LDM) usage. Assign data “1 (the memory block
						is used)” for the corresponding memory block.
					b1
					b2		bit	Memory Block
							b0	Memory Block #0
					b3
	513	01					b1	Memory Block #1
					b4
							b2	Memory Block #2
					b5
					b6
					b7
1	515					IP Address (Hex) for PBX over External LAN
						Note: This data is valid when the PBX is connected to the external
								PC LAN.
	516					When 172.16.253.0 (default IP address) for the PBX is used, this data
						setting is not necessary.
						Example: IP Address : 133.206.8.1
	517								INDEX	Set Hex
									515	85
									516	CE
	518								517	08
									518	01
	519					Subnet Mask (Hex) for PBX over External LAN
						Note: This data is valid when the PBX is connected to the external
								PC LAN.
	520					When 172.16.253.0 (default IP address) for the PBX is used, this data
						setting is not necessary.
						Example: Subnet Mask : 255.255.0.0
	521								INDEX	Set Hex
									519	FF
									520	FF
	522
									521	00
									522	00

ND-70895 (E)CHAPTER 4

Page 57

Revision 1.0