NEC ND-70895 (E) system manual Calling and Intermediate Station Number indication

COMMANDS

ASYD

System Data Assign Table (1)

			BIT
SYSTEM	SYSTEM	DATA	CORRE-
	DATA		SPONDING
DATA		(DATA)
	INDEX		DATA		SYSTEM DATA CONTENTS
TYPE		00– FF
	(INDEX)
(SYS)		(Hex)
	0 – 255		DATA
				BIT
			0/1
					Calling and Intermediate Station Number indication
			1	b0	(Dterm and ATTCON)
					0/1: Out/In service
					(Always assign “1”)
					Kind of Service Class indication (Dterm)
			1	b1	0/1: Out/In service
					(Always assign “1”)
			0	b2	Not used
	78
				b3	Station Number Display with 8-digit Name Display
					0/1: Out/In service
			0	b4	Fixed to “0”
					Name Display Service
				b5	0/1: Not to be serviced/To be serviced
					(FLF: Free Location Facility)
1			0	b6	Not used
			0	b7
				b0	Line Preference Service via AKYD
					0/1: Out/In service
			0	b1	Not used
				b2	Split Call Forwarding Service
					0/1: Out/In service
			0	b3	Not used
	79
				b4	Zip tone control at the time of SC F:Monitor connection
					0/1: Not to be controlled/To be controlled
				b5	Name Display Service for Calling Party Only
					0/1: Out/In service Note 1
				b6	OAI Service
					0/1: In/Out service Note 2
			0	b7	Not used

Note 1: When the bit is set to “0” the bottom line display of the Message Waiting Enhance Display Service becomes invalid.

Note 2: If, at an office in service with this bit set to “1” (No OAI Service is Provided), the bit value is to be changed to “0” (OAI Service is Provided).

ND-70895 (E)CHAPTER 4

Page 47

Revision 1.0