
using your corded base
Set the Base Language
In Idle:
1.Press <OK/MENU> and <UP/DOWn> to select Settings.
2.Press <UP/DOWn> to select LCD Language.
3.Press <OK/MENU> to confirm the setting; display shows Saved, you will hear a beep; display goes back to the previous menu.
Ringer Setup
Change Ringer Volume and Tone
1.Press <OK/MENU> and <UP/DOWn> to select Ringers.
2.Press <OK/MENU>; display shows Ringer Volume.
3.Press <UP/DOWn> to select the ringer volume that best suits your needs; phone rings to indicate current level.
Note: If ringer volume is OFF, display shows the ringer off icon.
1.Press <OK/MENU> to save; display shows Saved, then returns to previous screen.
2.Press <UP/DOWn> button to go to Ringer Tone; press <OK/MENU> to change the ringer tone.
3.Press <UP/DOWn> button to scroll through the ringer tone list (from Tone 1 to Tone 10).
4.Press <OK/MENU> to confirm the setting; display shows Saved, you will hear a beep; display goes back to the previous screen; press <CLEAr/MUTE> to return to previous menu.
Note: The respective ringer melody will be played during your selection.
Set the Dial Mode
You should normally leave the dialling mode at its default setting of TONE (also called DTMF) unless the phone is connected to an old exchange that only recognizes PULSE dialling.
In Idle:
1.Press <OK/MENU> and <UP/DOWn> to select Settings.
2.Press <OK/MENU> and <UP/DOWn> to select Dial mode.
3.Press <OK/MENU> and <UP/DOWn> to select TONE or PULSE.
24