Making/Answering Calls
Making calls
1Lift the handset and dial the phone number.
LTo correct a digit, press {C/T}, then enter the correct number.
2Press {C}.
3When finished talking, press {ih} or place the handset on the base unit.
Speakerphone
The handset features a digital speakerphone, which allows you to have
1During a conversation, press {s} to turn on the speakerphone.
LSpeak alternately with the caller.
2When finished talking, press {ih} or place the handset on the base unit.
Note:
LFor best performance, please note the following:
–Use the speakerphone in a quiet environment.
–If you or the other party have difficulty hearing each other, press {e} or {v} repeatedly to adjust the speaker volume as necessary.
LTo switch back to the receiver, press {C}.
To adjust the receiver or speaker volume
Press {e} or {v} while talking. 4 volume levels are available for the receiver. 6 levels are available for the speaker.
Redial feature
Previously dialled phone numbers (each 24 digits max.) can be redialled.
To redial the last number dialled
Press {R}, then press {C} or {s}.
LIf {s} is pressed, the unit will redial automatically if the other party’s line is engaged.
Note:
LYou can also press {C} or {s} before pressing {R}.
To make a call using the redial list
The last 10 phone numbers dialled are stored in the redial list.
1Press {R}.
LThe last number dialled will be displayed.
2Press {e} or {v} repeatedly to select the desired number.
LTo exit the list, press {ih}.
3Press {C} or {s}.
LIf {s} is pressed, the unit will redial automatically if the other party’s line is engaged.
To redial automatically
If you press {s} when redialling and the other party’s line is engaged, the unit will redial the phone number again automatically. The unit will redial up to 9 times. While the handset is waiting to redial, {s} will flash. While the handset is redialling, mute is automatically turned on.
Note:
LAutomatic redial is cancelled when any button (except {R}) is pressed.
LIf mute does not turn off after the line is connected, press {C/T}.
To edit a number in the redial list before calling it
1Press {R}.
2Press {e} or {v} repeatedly to select the desired number, then press
{j/OK}.
3Select “Edit and Call”, then press
{>}.
17