Panasonic KX-TG2382B Battery strength, Recharge, Battery information, Operation Operating time

Page 11

Battery strength

You can check the battery strength on the handset display. The battery strength is as shown in the chart below.

Display prompt

Battery strength

Fully charged

Medium

Low

(ﬂashing)

Needs to be recharged.

Recharge

Recharge the battery when:

—“Recharge” is displayed on the handset,

—“

” ﬂashes on the display, or

Recharge

—the handset beeps intermittently while it is in use.

•If you DO NOT recharge the handset battery for more than 15 minutes, the display

will continually indicate “Recharge” and/or “ ” will ﬂash when the handset is lifted off the base unit or the charger.

•If the battery has been discharged, the handset will display “Charge for 15h” when you place the handset on the base unit or the charger. The handset will not work. Keep charging until fully charged.

Battery information

After your Panasonic battery is fully charged (p. 10):

Operation	Operating time

While in use (TALK)	Up to 4 hours

While not in use (Standby)	Up to 7 days

•The battery operating time may be shortened depending on usage conditions and ambient temperature.

•Clean the charge contacts of the handset, the base unit and the charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.

•If the battery is fully charged, you do not have to place the handset on the base

unit or the charger until “Recharge” is displayed and/or “ ” ﬂashes. This will maximize the battery life.

•The battery cannot be overcharged.

Preparation

For assistance, please call: 1-800-211-PANA(7262)

11

Image 11

Contents Operating Instructions Charge the battery for about 15 hours before initial useFor extra orders, call Accessories includedAttach your purchase receipt here Energy Star For KX-TG2383S users For KX-TG2382B/KX-TG2382PW usersContents Canceling the Handset Registration Temporary Tone Dialing For Rotary or Pulse Service UsersBase unit location/Noise Battery chargeFor Best Performance Charger unit Location of ControlsBase unit This key has four active areas that are indicated by arrows How to use the Navigator keyLocation of Controls HandsetConnections InstallationCharging Installing the Battery in the HandsetBattery Charge InstallationRecharge Battery strengthBattery information Display prompt Battery strengthOptional Headset Connecting the optional headset to the handsetTo switch to the speakerphone while using the headset Belt ClipRinger tone GF H=Save Programmable SettingsHow to select a function item from the menu Programming GuidelinesUseful information Programmable SettingsFunction Menu Table Press á Save key Date and TimeScroll to Date and time by pressing Ö or Ñ Press á Press Ö Next keyTo check the date/time Dialing ModeFor Caller ID service users p Select a or B by pressing Ö or Ñ Press á Save key Line ModeSelect On or Off by pressing Ö or Ñ Press á Save key Auto Talk FeatureTo turn the ringer on Ringer VolumeScroll to Ringer setting by pressing Ö or Ñ, and press á Select the desired volume by pressing Ö or ÑLCD contrast Low High LCD ContrastDate and time HInitial set Hlcd contrast Auto talk LCD contrastGreeting Message Press GREETING!REC to start the recording modeWhen ﬁnished, press Preparing the Answering SystemTo erase the recorded greeting message Flash Memory Message Backup Message storagePreparing the Answering System To check the recorded greeting messageIf you select Greeting only, the unit will answer a Caller’s Recording TimeSelect the recording time by pressing Ö or Toll saver Number of RingsMaking Calls Using the HandsetFor best performance, please note the following Making CallsPress Dial a phone number Hands-free Digital Duplex SpeakerphoneTo redial the last number dialed on the handset To redial using the redial list Memory RedialTo dial after conﬁrming the entered number Backlit LCD display To put a call on holdTo release the hold Lighted handset keypadPressing Answering CallsAuto Talk How caller information is displayed when a call is received Caller ID ServiceViewing the Caller List Using the Caller ListIf a caller calls more than once Using the Caller ListCalling Back from the Caller List What √ meansScroll to the desired caller by pressing Or Ñ Press á Caller ID Number Auto Edit Feature pEditing the Caller’s Phone Number Auto edit GF H=Save Caller ID Number Auto Edit FeatureScroll to Caller ID edit by pressing Ö or Ñ, and press á Auto talk HCaller ID edit Set tel lineEdit HSave directory Storing Caller List Information in the DirectoryScroll to Save directory by pressing Ö or Ñ, and press á Caller list 10 new calls GF H=DirectoryClear Erasing Caller List InformationTo erase a speciﬁc caller from the Caller List To erase all entries in the Caller ListPress Ö Next key Enter a phone number, up to 22 digits DirectoryStoring Names and Numbers For example, to enter Tom Jones DirectorySelecting characters to enter names Index table Dialing from the DirectoryIf you make a mistake while entering a name To search for a name by initialJane Walker EditingPress Ö Next key Add a number to the current number 4567890 IH G=Next 12344567890Helen Clear? =No CLEAR=Yes ErasingTo page another handset IntercomMaking Intercom Calls To page the base unit, pressAuto Talk Answering Intercom CallsTo page all handsets, press Handset LOCATOR/INTERCOM ALL During an intercom callTo transfer a call from the handset Transferring a CallTo join a conversation Call Share Conference CallsCall Share Ex. a conference call with Handset 1Muting Your Conversation Special FeaturesFor Call Waiting Service Users Temporary Tone DialingSelecting the ﬂash time How to Use the Pause ButtonFlash Button For PBX Line/Long Distance CallsSelect the desired ringer tone by pressing Special FeaturesRinger Tone Incoming Call TonePress ANSWER!ON to turn on the Answering System Setting the Unit to Answer CallsAutomatic Answering Operation Monitoring incoming callsTo play back messages Listening to MessagesErasing all messages Erasing MessagesDuring playback Erasing a speciﬁc messageScroll to Message play by pressing Ö or Remote Operation with the HandsetTo listen to messages Voice menuALL Message Playback Direct commandsSummary of remote operation Remote Operation from a Touch Tone PhoneRemote code 11 H=Save 35 H=Save Enter a remote code using a 2-digit number Press á Save keyRemote Code To check the remote codeShaded parts are voice prompts Voice MenuRemote Operation from a Touch Tone Phone Call your unit and wait for 15 rings Direct Remote OperationTurning on the Answering System Skipping the greeting messageWall Mounting To charge the handset battery Wall Mounting Adding Another PhoneBattery Replacement Registration HDeregistration Canceling the Handset RegistrationDate and time HInitial set Set answering HHS register Scroll to Deregistration by pressing Ö or ÑHandset Re-registering the HandsetBase unit If the Following Appear From the directory, see When trying to store an item in the directory,Base unit. To cancel another handset Directory memory is full. To erase other itemsCordless Telephone Problem TroubleshootingHandset or the base unit. Try again later Problem Cause & RemedyTo page. Try again later Conference call, you cannotAnswering System Problem Cause & Remedy TroubleshootingGeneral Problem For KX-TG2382B/KX-TG2382PW Battery has been discharged. Charge the battery fully pClean the charge contacts and charge again Currently registered to another base unitImportant Safety Instructions FCC and Other Information Important Safety InstructionsUseful Information FCC and Other Information Index Battery ChargeIndex SpeciﬁcationsLimited Warranty Coverage Panasonic Telephone Products Limited WarrantyCustomer Services Directory Serial No Date of purchase For product serviceWhen you ship the product For your future reference