Panasonic KX-TG2680N operating instructions FCC and Other Information, Ringer Equivalence No. REN

Page 94

FCC and Other Information

If requested by the telephone company, inform them as follows:

FCC Registration No. . . . . . . . . . . . . . . . . . . . . . (found on the bottom of the unit) Ringer Equivalence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1B The particular telephone line to which the equipment is connected.

This unit must not be connected to a coin operated line.

If you are on a party line, check with your local telephone company.

Ringer Equivalence No. (REN):

The REN is useful in determining the quantity of devices you may connect to your telephone line and still have all of those devices ring when your telephone number is called. In most, but not all areas, the sum of the REN’s of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area.

In the event terminal equipment causes harm to the telephone network, the telephone company should notify the customer, if possible, that service may be stopped.

However, where prior notice is impractical, the company may temporarily cease service providing that they:

(a)Promptly notify the customer.

(b)Give the customer an opportunity to correct the problem with their equipment.

(c)Inform the customer of the right to bring a complaint to the Federal Communication Commission pursuant to procedures set out in FCC Rules and Regulations Subpart E of Part 68.

The Telephone Company may make changes in its communications facilities, equipment, operations or procedures, where such action is reasonably required in the operation of its business and is not inconsistent with the rules and regulations in FCC Part 68.

If such changes can be reasonably expected to render any customer terminal equipment incompatible with telephone company communications facilities, or require modification or alteration of such terminal equipment, or otherwise materially affect its use or performance, the customer shall be given adequate notice in writing, to allow the customer an opportunity to maintain uninterrupted service.

When programming emergency numbers and/or making test calls to emergency numbers:

1.Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.

2.Perform such activities in the off-peak hours, such as early morning hours or late evenings.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

Privacy of communications may not be ensured when using this phone.

94

Image 94
Contents Charge the battery for about 8 hours before initial use Operating InstructionsSerial No Date of purchase Before Initial UseAttach your purchase receipt here For your future reference One Wall Mounting Adaptor p Belt Clip pBase Unit Location/Noise Battery ChargeFor Best Performance For best performance, extend the handset antenna fullyContents Answering System Fashion PlateTM Snap-On Color Covers OptionalLocation of Controls Base unit20, 37, 51 ANSWER!ON Button and Indicator p , 59Erase Button p Button pHow to handle the handset antenna HandsetBacklight LCD Displays Standby modeDisplays New callSettings ConnectionsDisplay prompt Battery strength Battery strengthHigh Medium Low flashing Needs to be recharged Operation Approx. battery life Battery informationAfter your Panasonic battery is fully charged p RechargeSelecting the Dialing Mode Make sure the unit is in the standby mode initiallyHSet line mode Talk switching Selecting the Line ModePoints to Set line mode Line mode GF H=SaveProgrammable Functions During programmingSet line mode HTalk switching Setting the Auto Talk FeaturePoints to Talk switching Press Ö or Ñ to select On or OffPress Ö or Ñ to select Off or On Setting the Talking Caller ID FeaturePoints to Talk Caller ID HTalk Caller IDWith the handset Selecting the Ringer VolumeDesired volume Press Ö or Ñ to selectTo select High or LOW, press Ringer With the base unitTo turn the ringer ON, press Ringer Greeting Message Preparing the Answering SystemTo record a greeting message To erase the recorded greeting message Flash Memory Message BackupGreeting message sample Pre-recorded greeting messageProgramming Summary for the Answering System HProgram Selecting the Caller’s Recording Time=Yes Points to TAD programDay and Time Adjustment Press Base unit displayFor Caller ID service users p Toll saver Selecting the Number of RingsPress Dial a phone number Making CallsWith the Handset To hang up, press OFF or placeHands-free Digital Duplex Speakerphone When the other party answers, talk intoTalk 00-00-00 Off 00-01-08 To increase, press ÑTo dial after confirming the entered number If noise interferes with the conversationTo redial the last number dialed on the handset To redial after confirming the last number dialedDial a telephone number When the other party answersWith the Base Unit Digital Duplex Speakerphone Talk into the MIC microphoneTo put a call on hold To adjust the speaker volume 8 levels while talkingTo redial the last number dialed on the base unit To release the holdSimultaneous Keypad Dialing Useful informationWith the Base Unit Answering CallsAuto Talk Caller ID Service ROBINSON,TINAUsing the Talking Caller ID feature Call group feature Dual-Color Visual RingerWhile the handset is off the base unit To check the number of new callsHandset display Press Ñ or Ö to turn the display onPress Ö or Ñ to enter the Caller List Using the Caller ListViewing the Caller List To exit the list, press OFFIf a caller calls more than once Calling Back from the Caller ListWhat √ means Press Ö or Ñ repeatedly to find the desired caller=Next H=Edit Editing the Caller’s Phone NumberHEdit Save directory Press á Edit key to select a patternPress Ö or Ñ to enter the Caller PARKER,FREDEdit HSave directory Storing Caller List Information in the DirectoryPress Ö or Ñ to select Save directory, and press á Yes key Enter name IH G=NextWith the handset Erasing Caller List InformationTo erase a specific caller from the Caller List With the base unitPress Ö or Ñ to enter Caller List To erase all entries in the Caller ListWith the handset With the base unit Press Ö or Ñ to select All clearOne-Touch Dialer Storing a Phone Number in the Direct ButtonPress or Using the DirectoryDialing the Stored Number in the Direct Button 1234567890123456While the arrow points to Save directory, press á Yes key Enter a name, up to 15 characters usingStoring Names and Numbers in the Directory Directory= 20 itemsSet group IH G=Next If not required, select OffTom Jones =Edit H=Save If you make a mistake while entering a name Selecting Characters to Enter NamesNumber of times key is pressed Keys For example, to enter Tom Jones With the handset/base unit Finding Items in the DirectoryTo search for a name by initial With the handset With the base unit Dialing from the DirectoryIndex table Keys IndexAdd a number to the current number Editing an Item in the DirectorySet group Off IH G=Next Erasing an Item from the Directory Paging the base unit from the handset IntercomPaging the handset from the base unit Handset locator From the base unit to the handset Transferring a Call Using the IntercomFrom the handset to the base unit During an intercom callFor Call Waiting Service Users Special FeaturesAutomatic Security Code Setting How to Use the Pause ButtonFlash Button For Rotary or Pulse Service UsersTemporary Tone Dialing Selecting the flash timeMonitoring incoming calls Setting the Unit to Answer CallsAutomatic Answering Operation Press ANSWER!ON to turn on the answering systemListening to all recorded messages Listening to MessagesListening to only new messages During playbackTo call back the displayed number From the HandsetDuring playback, press DIGITAL!SP-PHONE Erasing all messages Erasing MessagesErasing a specific message Within 5 seconds, press ErasePager Call Make sure that the unit is in the standby mode initiallyAccess code, if required by your pager company, and press Storing a Pager NumberStoring a 1-800 pager number Enter home no Storing Your Home Telephone NumberEnter your home telephone number up to 11 digits To erase the stored home telephone number To confirm the stored pager and home numbersTo erase the stored pager number Useful InformationTo select Received call, press Pager Mode SettingTo select Recorded MSG, press Setting the Unit to Call a Pager To turn off the pager call mode Repeat steps 1 throughRemote Operation from a Touch Tone Phone Summary of remote operationTo check the remote code Setting the Remote CodeEnter a remote code using a 2-digit NumberVoice Menu Shaded boxes are voice promptsRecording a Memo Message All Message PlaybackNew Message Playback Erasing All MessagesDirect commands Direct Remote OperationTurning on the answering system Skipping the greeting messageVoice menu Enter the desired direct commands pRemote Operation with the Handset To end remote operation, press FLASH/CALL!WAIT/PLAYBACKDuring playback You can also press Ü to repeat a Message Each time you press 3, the mode willBase unit, and the mode will not turn on Voice menu will start pWall Mounting To attach the belt clip To remove the belt clip Using the Belt ClipTo charge the handset battery Insert the handset in the cradleTo switch to the speakerphone while using the headset Using an Optional HeadsetConnecting the headset to the handset Press . To return to the headset, pressTo adjust the headset receiver volume High, Medium or Low Connecting the headset to the base unitMaking/Answering calls Battery Replacement Adding Another Phone Fashion PlateTM Snap-On Color Covers Optional Place the new color cover, fitting Tabs on the cover into the slots onIf the Following Appear Save errorHandset display Base unit display Cordless Telephone ProblemRemedy Before Requesting HelpUseful Information Digits long, the number will not be Problem RemedyAnswering System ProblemRemedy Message full flashesDIGITAL!SP-PHONE or press General ProblemRemedy Only Important Safety Instructions Useful Information FCC and Other Information Ringer Equivalence No. RENUseful Information For product service When you ship the product