Panasonic KX-TG2352PW, KX-TG2352W Base unit, Press ALL on base for 3 sec, then press H, Handset

Page 19

Registration for Additional Handsets

KX-TG2352PW/KX-TG2352W includes two handsets with the base unit. You can expand the system by adding up to 1 optional handset to the system. A maximum of 3 handsets can be registered at the base unit. At most 3 extensions (3 handsets or 2 handsets and base unit) can operate at a time. But during a conference call (p. 41), only 2 handsets can be used. If the 3rd handset tries to join, its LCD displays “Busy” and it will not join the conversation.

KX-TG2352PW/KX-TG2352W	KX-TGA230B,
	KX-TGA230PW
	OR
	KX-TGA230W

The included handsets are pre-registered at the factory and assigned the extension number 1 and 2. You do not need to register these handsets which has “[1]” and “[2]” on the display.

If you purchase an optional handset, you must register it at the base unit. A handset will be assigned the extension number 3 at registration. The 3rd handset is displayed “[3]”.

The model numbers of the optional handsets are KX-TGA230B, KX-TGA230PW and KX-TGA230W. To order, contact your dealer or call 1-800-211-PANA(7262) to locate a dealer.

Make sure the base unit and the other handsets are not being used. Registration must be completed within 1 minute.

Preparation

The handset display shows the instructions as shown on the right.

1Base unit:

Press and hold HANDSET LOCATOR

(ALL) until the CHARGE indicator flashes.

Press [ALL] on base for 3 sec, then press [H].

2Handset:

#Press á.

$Wait until a long beep sounds and the display shows the registered number. The registration will be then complete.

•The registered number “[1]” to “[3]” is shown on the top right of the display.

Handset Registering

Ex. Extension number 3

Handset [3] Registered

[3]

For assistance, please call: 1-800-211-PANA(7262)

19

Image 19

Contents Operating Instructions Charge the battery for about 15 hours before initial useEnergy Star Attach your purchase receipt hereFor Best Performance Battery ChargeBase Unit Location/Noise Contents Storing Names and Numbers Canceling the Handset RegistrationHandset Locator Buttons Charge Contacts p Charge Indicator pALL, 1 to 3 p Handset How to use the Navigator keyCharger unit InstallationConnections Base unitBattery Charge Installing the Battery in the HandsetRecharge Battery strengthBattery information Display prompt Battery strengthOptional Headset Belt ClipHow to select a function item from the menu Programmable SettingsProgramming Guidelines Useful information Function Menu TableSelect Pulse or Tone by pressing Ö or Press á Save key Dialing ModeSelect a or B by pressing Ö or Ñ Press á Save key Line ModeGF H=Save Select On or Off by pressing Ö or Ñ Press á Save key Auto Talk FeatureTo turn the ringer on Ringer VolumeScroll to Ringer setting by pressing Ö or Ñ, and press á Select the desired volume by pressing Ö or ÑLCD contrast Low High Ringer setting HInitial set Hlcd contrast Auto talkLCD Contrast LCD contrast Low High =SaveHandset Registering Base unitPress ALL on base for 3 sec, then press H HandsetBack side Registration for Additional HandsetsHands-free Digital Duplex Speakerphone Press or and press PAUSE/REDIAL To redial using the redial list Memory RedialTo dial after conﬁrming the entered number To redial the last number dialed on the handsetBacklit LCD display To put a call on holdTo release the hold Lighted handset keypadAuto Talk Answering CallsHow caller information is displayed when a call is received Caller ID ServiceViewing the Caller List Using the Caller List12344567890 Editing the Caller’s Phone Number HInitial set Caller ID Number Auto Edit FeatureRinger setting Scroll to Initial set by pressing Ö or ÑIH G=Next Storing Caller List Information in the DirectoryScroll to Save directory by pressing Ö or Ñ, and press á Enter nameCaller list 10 new calls GF H=Directory Erasing Caller List InformationTo erase a speciﬁc caller from the Caller List To erase all entries in the Caller ListDirectory Tom Jones =Edit H=Save Press Ö Next key Enter a phone number, up to 22 digitsFor example, to enter Tom Jones Selecting characters to enter namesIf you make a mistake while entering a name To search for a name by initial Dialing from the DirectoryPress Ü or á to enter the directory list Scroll to the desired item by pressing Ö or ÑPress Ö Next key When ﬁnished, press á Save keyEditing Press Ö Next key Add a number to the current numberHelen Clear? =No CLEAR=Yes ErasingIntercom Call from Intercom 00-00-03 Answering Intercom CallsAuto Talk To transfer a call from the handset Transferring a CallTo join a conversation Call Share ConferenceCall Share Ex. a conference call with Handset 1Storing a Voice Mail Access Number Voice Mail ServicePress Ö Save key To erase a stored numberPress á at VM tone detect Setting the Voice Mail VM Tone DetectionAfter the voice mail box has received messages Save directory HV.M. access Ringer settingListening to Voice Mail Messages To listen to your voice mail messagesMuting Your Conversation Special FeaturesFor Rotary or Pulse Service Users Temporary Tone DialingFor PBX Line/Long Distance Calls For Call Waiting Service UsersHow to Use the Pause Button Call Waiting Caller ID FeaturePress á Scroll to Set flash time by pressing Flash ButtonSelecting the flash time Or ÑIncoming Call Tone Ringer ToneWall Mounting To charge the handset battery Wall Mounting Adding Another PhoneBattery Replacement Canceling the Handset Registration Canceling Registration/Re-registration#Press á Re-registering the HandsetPress á at Registration Press and hold Handset LocatorIf the Following Appear From the directory, see When trying to store an item in the directory,Base unit. To cancel another handset Directory memory is full. To erase other itemsProblem TroubleshootingYou cannot program items, Programming is not possible while Problem Cause & RemedyDisplayed and/or Continues to flash, or Recharge is displayed, Charge the battery fully pTo page. Try again later Or the base unit. Try again laterOnly Important Safety Instructions Useful Information FCC and Other Information For assistance, please call 1-800-211-PANA7262 FCC and Other Information Base unit SpecificationsIndex Auto Talk FeatureLimited Warranty Coverage Panasonic Telephone Products Limited WarrantyCustomer Services Directory Serial No Date of purchase For product serviceWhen you ship the product For your future reference