Programmable Settings
Guide to handset programming
For your reference, a chart of all programmable functions is printed below. Details for each item can be found on the corresponding pages. To program, press {MENU}, press {V} or {^} to scroll through the menu, and press {>} or {Select} when the desired menu item or setting is displayed.
Important:
LBefore programming, make sure the handset is not being used. The handset must be operated near the base unit and while off the base unit.
Main menu |
| Page | |
V.M. access | – | – | page 29 |
Ringer setting | Ringer volume | – | page 31 |
| Ringer tone | – | page 31 |
Voice enhancer | – | – | page 32 |
Customer support | – | – | page 35 |
Initial setting | Voice Mail | Store VM access# | page 28 |
|
| VM tone detect | page 28 |
| Message alert | – | page 29 |
| LCD contrast | – | page 33 |
| Key tone | – | page 34 |
| Auto talk | – | page 32 |
| Caller ID edit | – | page 32 |
| Set tel line | Set dial mode | page 33 |
|
| Set flash time | page 33 |
|
| Set line mode | page 34 |
| Registration | – | page 35 |
| Change language | – | page 33 |
Note:
LTo exit programming, press {OFF} at any time.
LTo go back to the previous menu, press {<} or {Back}, or press {>} or {Select} while “(Go back)” is displayed.
30For assistance, please call