Panasonic KX-TG2314 manual Programmable Settings Line Mode Handset, Auto Talk Handset

Programmable Settings

Line Mode Handset

The line mode is preset to “B” and generally should not be adjusted. If “Line in use” on the handset is not displayed properly or the IN USE indicator on the base unit does not light properly, the line mode selection is incorrect. Set line mode to “A”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.	KBack dB SelectL
3	Scroll to “Set tel line” by pressing [d] or
		Set tel line
	[B], then press Select.	KBack dB SelectL
4	Scroll to “Set line mode” by pressing [d] or
		Set line mode
	[B], then press Select.	KBack dB SelectL
5	Select “A” or “B” by pressing [d] or [B].
		Set line mode
		:B
		KBack dB SaveL

6Press Save, then press [OFF].

Auto Talk Handset

The Auto Talk feature allows you to answer calls by simply lifting the handset off the base unit or charger. You do not need to press [C] or [s]. The factory preset is OFF.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.	KBack dB SelectL
3	Scroll to “Auto talk” by pressing [d] or [B],
		Auto talk
	then press Select.	KBack dB SelectL
4	Select “On” or “Off” by pressing [d] or [B].
		Auto talk
		:Off
		KBack dB SaveL

5Press Save, then press [OFF].

•In order to view Caller ID information after you lift the handset to answer a call, leave the Auto Talk feature turned off.

14