Panasonic KX-TG2314 manual Using the Caller List Caller ID Number Auto Edit Handset

Using the Caller List

Caller ID Number Auto Edit Handset

Once you call back an edited number (p. 25), this unit can automatically edit incoming phone numbers from the same area code in the Caller List and each time you receive a call. For example, it can ignore the area code of calls originating from your area code, so that you can call these numbers from the Caller List without dialing the area code.

To activate this feature, you must edit a caller’s phone number in the Caller List (p. 25) by selecting pattern F, G, or H, then make a call to that number. Calls from numbers in that area code will be edited automatically. The unit can remember up to 4 area codes to be edited according to patterns F and G.

When more than 5 area codes are edited, older area codes are reset to pattern H. Phone numbers from the 4 most recently edited area codes will be automatically edited.

You can turn this feature on or off using the handset. The factory preset is ON.

To turn Caller ID Number Auto Edit on or off

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.	KBack dB SelectL
3	Scroll to “Caller ID edit” by pressing [d]
		Caller ID edit
	or [B], then press Select.	KBack dB SelectL
4	Select “Off” or “On” by pressing [d] or [B].
		Auto edit
		:On
		KBack dB SaveL

5Press Save, then press [OFF].

•If you fail to reach your destination when making a call, the phone number you dialed might have an incorrect pattern. Edit the phone number with another pattern (p. 25).

•When this feature is turned off, the unit will still be able to display Caller ID, but incoming Caller ID numbers will not be automatically edited.

•If you move to another area, you may need to turn this feature off to erase the previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again.

26