3.2 Connection
3.2Connection
3.2.1Connection
PBX features and settings can be customised using a PC and the KX-TE Maintenance Console software.
Programming can be performed both on-site, using a PC connected directly to the PBX, and off-site, by accessing the PBX via modem.
Serial Interface Connection
A PC can be connected to the RS-232C port of the PBX, or to the USB port for faster access.
RS-232C Port
To COM Port 
PC
To USB Port 
PC
USB Port
Notes
•For pin assignments and maximum cabling distance, refer to "2.8 Connecting Peripherals".
•When connecting the KX-TE Maintenance Console to the PBX using an RS-232C cable, assign the following values to the Serial Interface (RS-232C) port of the PBX through system programming, "SMDR RS-232C Parameter [800]":
•Baud Rate: 9600 bps
•Word Length: 8 bits
•Parity Bit: None
•Stop Bit: 1 bit
Installing the USB Driver
CAUTION
Installing the USB driver may prevent the USB driver for KX-TDA series or PC Console/Phone Software from functioning correctly. In this case, update the USB drivers as necessary from the following folders on the included CD-ROM: