Panasonic KX-TG9542, KX-TG9541 If you subscribe to a DSL/ADSL service, Battery installation

Getting Started

Note:

R “Check tel line2” is displayed on the unit. To erase it, see page 64.

If you subscribe to a DSL/ADSL service

Please attach a DSL/ADSL filter (contact your DSL/ ADSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:

–noise is heard during conversations.

–Caller ID features do not function properly.

To connect to a 2-line telephone jack

For this connection, please purchase a Panasonic 2-line splitter (page 4).

Example: DSL/ADSL line is line 2

Connect the “Transparent” plug telephone line cord (2-wire cord) (1) to the 2-line splitter (3) until you hear a click.

Connect the “GREEN” plug telephone line cord (4-wire cord) (2) to a DSL/ADSL filter (not supplied) (4), then to the 2-line splitter (3) until you hear a click.

Connect the 2-line splitter (3) to the 2-line telephone jack (RJ14C) (5) until you hear a click.

	1	2
5
“Transparent”		“GREEN”
plug		plug
3	1	2

4

*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.

To connect to 2 single-line telephone jacks

Example: DSL/ADSL line is line 2

Connect the “Transparent” plug telephone line cord (2-wire cord) (1) to the unit, then to the single-line telephone jack (RJ11C) (2) until you hear a click.

Connect the “GREEN” plug telephone line cord (4-wire cord) (3) to a DSL/ADSL filter (not supplied) (4), then to the single-line telephone jack (RJ11C) (5) until you hear a click.

1	2
“Transparent” plug
1	3
2	“GREEN”
4
	plug
5

*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.

Battery installation

R USE ONLY Ni-MH batteries AAA (R03) size (A).

R Do NOT use Alkaline/Manganese/Ni-Cd batteries.

RConfirm correct polarities ( , ).

1

R Follow the directions on the display to set up the unit.

10 For assistance, please visit http://www.panasonic.com/help

TG954x(en)_0628_ver031.pdf 10

2013/06/28 12:35:29