Panasonic KX-TG9542, KX-TG9541 Voice mail service for landline, Voice mail message indication

B

B

Wall mounting

The base unit can be mounted on a wall by changing the wall mounting adaptor’s position.

Note:

R Make sure that the wall and the fixing method are strong enough to support the weight of the unit.

Base unit

1 To remove the wall mounting adaptor, push down the release levers (A). Remove the adaptor (B).

MbN: Select the desired setting. a MSAVEN

MMENUN#332

1

2

3 Proceed with the operation for your unit. Handset: MOFFN

Base unit: MEXITN

– You do not subscribe to voice mail service.

– Your service provider/telephone company does not send voice mail tones.

– Your phone is connected to a PBX.

If you are not sure which setting is required, contact your service provider/telephone company.

Turning VM tone detection on/off

The default setting is “On”.

Program this setting using either the base unit or one of the handsets.

Handset / Base unit

Useful Information

Voice mail service for landline

Voice mail is an automatic answering service offered by your service provider/telephone company. After you subscribe to this service, your service provider/telephone company’s voice mail system answers calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by your service provider/telephone company, not your telephone. Please contact your service provider/telephone company for details of this service.

Important:

R To use the voice mail service provided by your service provider/telephone company rather than the unit’s answering system, turn off the answering system (page 54). For details, see page 60.

Voice mail message indication

When you have new voice mail messages,

“Voice Mail: ” and/or “Voice Mail: ” is displayed if message indication service is available. In order to listen to your voice mail messages, you must dial the voice mail access number of your service provider/telephone company.

Note for handset and base unit:

R If the handset and base unit still indicate there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset or base unit beeps.

Voice mail (VM) tone detection

Handset / Base unit

Your service provider/telephone company sends special signals (sometimes called “voice mail tones” or “stutter tones”) to the unit to let you know you have new voice mail messages. If you hear a series of dial tones followed by a continuous dial

A

A

tone after you press MN on the handset or press MZN on the base unit, you have new voice mail messages. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voice mail messages have been recorded.

Turn this feature off when:

2A Turn the adaptor so that the words “UP WALL” are facing up.

B Tuck the telephone line cord inside the wall mounting adaptor.

62 For assistance, please visit http://www.panasonic.com/help

TG954x(en)_0628_ver031.pdf 62

2013/06/28 12:35:33