Panasonic KX-TG9542, KX-TG9541 Error messages, Display message, Base no power or, Cause/solution

Page 64

Useful Information

Error messages

Display message

Base no power or

No link. Re-connect base AC adaptor.

Busy

Check tel line1

Check tel line2

Error!!

Failed

Invalid

Requires subscription to Caller ID.

Use rechargeable battery.

Cause/solution

R The handset has lost communication with the base unit. Move closer to the base unit and try again.

R Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again.

R The handset’s registration may have been canceled. Re-register the handset (page 46).

R No cellular phone is paired to the base unit. Pair a cellular phone (page 18).

R The called unit is in use.

R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move

closer and try again.

R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 9).

R If you use the unit as a single-line telephone only, erase the message as follows:

To erase “Check tel line1”, press MMENUN. a #189 To erase “Check tel line2”, press MMENUN. a #190 When a power failure occurs, the message is displayed again. Erase again as above.

R Recording was too short. Try again.

R Someone is using a cellular line or headset. Try again later.

R The phonebook copy is incomplete (page 50). The cellular phone is disconnected from the base unit. Make sure that other Bluetooth devices are not connected to the cellular phone, and try again.

R Although the unit tried to connect to the cellular phone or headset, the connection has been failed.

–Someone is using a cellular line or headset. Try again later.

–Make sure that the cellular phone or headset is not connected to other Bluetooth devices.

R There is no handset registered to the base unit matching the handset number you entered.

R The handset is not registered to the base unit. Register the handset (page 46).

R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed.

R A wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 6.

64	For assistance, please visit http://www.panasonic.com/help

TG954x(en)_0628_ver031.pdf 64

2013/06/28 12:35:33

Image 64

Contents Model No. KX-TG9541 Model shown is KX-TG9541Table of Contents Supplied accessories Accessory informationModel composition Other information Additional/replacement accessoriesExpanding your phone system Your Bluetooth headset*1 1 max System capabilitiesTrademarks Maximum of 5 parties are availableFor your safety Important safety instructions Specifications Setting up Connecting the AC adaptorConnecting the telephone line cord GreenBattery installation If you subscribe to a DSL/ADSL serviceCheck tel line2 is displayed on the unit. To erase it, see Battery level Icon Battery chargingHigh Medium Low Power back-up operation Battery cautionBattery life Batteries for the base unit are not suppliedIntelligent eco mode ControlsMflashn Mcall Waitn Nmnoise Reductionn Talk MoffnDisplay icons/Indicators Charging the cellular phone by USBGreeting only or Greeting1&Only is selected Language setting Other settingsDialing mode Display languageGetting Started Link to cell feature Pairing a cellular phoneUnpairing a cellular phone Your cellular phoneLink to cell settings Ring as cell modeSelecting which unit receives cellular calls Auto connection to the cellular phoneCellular line selection Storing your area code for dialingOnly a 7-digit phone number to make Local callChanging the Bluetooth PIN Personal Identification Number Making landline calls Making cellular callsMselectn Useful features during a call Answering callsHandset clarity booster Handset noise reductionHandset equalizer Call shareConference call with an outside call and an intercom call Using the other line during a conversationTo answer a 2nd call Hold a Mselectn Using the other line during a landline callTo return to the 1st call line 1, press ML1N Mredialn Adjusting the speaker volumeMexitn Adjusting the base unit ringer volume Press Mline 1N or Mline 2NMconfn Press Mholdn during a landline call Press Mholdn during a cellular callIntercom Making an intercom callAnswering an intercom call Mmenun a MbN Intercom a MselectnPhonebook Adding entriesMenu MbN Add new entry a MselectnFinding and calling from a phonebook entry Editing entries Chain dialErasing entries YesSpeed dial Adding phone numbers to speed dial keysEditing an entry Erasing an entryHandset Using a cellular line Using the landlineViewing an entry/Making a call MbN Yes a Mselectn 5 MexitnDisplay menu tree and direct command code table Menu listMmenun Play new messageSettings Erase allMessage*3 GreetingBluetooth Device*4 Ringer volumeLink to cell Connect*3 1Add new Disconnect*3Settings Unpair Alarm OnceAdjustment*3, *9 Auto Manual Main menu Initial setting Ringer setting Ringer volumeAdjustment *3, *9 Auto Setting *13 Detector2 *15Setting *3 Code Country code Set date & time Date and time *3LCD contrast Key toneSet music on Caller ID editAlarm Main menu Key detector*13 Sub-menu Settings Code UnitBattery check SearchSilent mode Call block Turning silent mode on/offDaily Mselectn a Moffn Changing the start and end timeSave AreaMcidn Other programming Registering a unitChanging the handset name Operating additional unitsUsing Caller ID service Caller ID featuresCaller list Talking Caller IDEditing a caller’s phone number To call back, press M N To exit, press MoffnTo call back, press MZN To exit, press Mexitn Base unit Press Mline 1N or Mline 2NErasing selected caller information Erasing all caller informationProceed with the operation for your unit. Handset MCN CID Base unit McidnPage Text message SMS alert settings Pairing a headset to the base unitText message SMS alert Text message alerts can be made by Cell 1, Cell 2, and CellOperating a Bluetooth wireless headset using a landline Adjusting your headset receiver volume Base unit While your headset is on a landline callTurning the answering system on/off Answering system for landlineGreeting message Using a pre-recorded greeting message Resetting to a pre-recorded greeting messageRecording your greeting message Base unit Mexitn Selecting Greeting only orUsing the base unit Using the handsetListening to messages Playing back the greeting messageAdvanced new message alerting features Audible message alertNew message alert by a call Mmenun a MbN Answering device aBy entering a phone number Base unit From the phonebookMbN Alert to a Mselectn a Meditn MbN On/Off a MselectnRemote access code Using the answering system remotelyRemote operation MbN Remote code a MselectnAnswering system settings Remote commandsVoice guidance Turning on the answering system remotelyCaller’s recording time Voice mail service for landline When you have new voice mail messagesVoice mail message indication Voice mail VM tone detectionCharger Error messages Base no power orBusy Check tel line1 Check tel line2 Error Failed Invalid Cause/solutionTroubleshooting General use Problem Cause/solutionBase unit Presence of any electrical interference, there may be aBattery recharge Problem Cause/solution Menu list ProblemMaking/answering calls, intercom Problem Cause/solution Unit directly into the wall jack Caller ID/Talking Caller ID Problem Cause/solutionRing or later Move closer to the base unit CID. To change the mode, see Using Bluetooth devices Problem Cause/solutionEntry cannot be copied even by selecting another group Text message SMS alert is not announced Answering system Problem Cause/solution Bluetooth PIN Problem Cause/solutionLiquid damage Problem Handset/Base unitFCC and other information FCC RF Exposure Warning Guía Rápida Española Unidad baseCargador Para conectarlo a una toma telefónica para 2 líneasCargue aproximadamente durante 7 horas Nota Para conectarlo a 2 tomas telefónicas de una sola líneaAuricular/Unidad base Teclas de función Tecla navegadora AuricularIdioma de la pantalla Unidad base Exit Idioma de la guía de vozAuricular OFF Unidad base Exit Nota Su teléfono celularMarcas registradas Estado Significado Auricular enlace a elementos de la pantalla del celularCómo conectar o desconectar manualmente el teléfono celular Para conectarlo o desconectarloPara ajustar el volumen del timbre Auricular/Unidad base Cómo hacer y contestar llamadas AuricularOFF Para hacer una llamada celularDirectorio telefónico Auricular Para encenderlo/apagarloContestador de llamadas de la línea terrestre Auricular Para escuchar mensajes nuevosPara copiar desde teléfonos celulares emparejados Para copiar desde otros teléfonos celulares no emparejadosCuando aparezca el menú Selec. modo Teléfono celularSi el NIP de su audífono es 0000, vaya al paso Pregunta Causa y solución Auricular MenuCustomer services Customer Services Directory United States and Puerto RicoWarranty For United States and Puerto Rico Panasonic Corporation of North AmericaLimited Warranty Limits And Exclusions Index Index For your future reference PNQX6073ZA TT0713MU0 E