Panasonic KX-TG9541 Setting up, Connecting the AC adaptor, Connecting the telephone line cord

Getting Started

Setting up

Connecting the AC adaptor

n Base unit

Connect the AC adaptor plug to the unit until you hear a click.

Connect the AC adaptor to the power outlet.

Note:

To connect to a 2-line telephone jack

Connect the “GREEN” plug telephone line cord (4-wire cord) (1) to the unit, then to the 2-line telephone jack (RJ14C) (2) until you hear a click.

1

R Use only the supplied Panasonic AC adaptor PNLV234.

“GREEN” plug

2

1

1

2

R Follow the directions on the display to set up the unit.

nCharger

Connect the AC adaptor to the power outlet.

1

Connecting the telephone line cord

Refer to one of the following methods depending on your situation:

–To connect to a 2-line telephone jack: page 9

–To connect to 2 single-line telephone jacks: page 9

–If you use the unit as a single-line telephone only: page 9

Connect the telephone line cord until it clicks into the base unit and telephone line jack.

To connect to 2 single-line telephone jacks

For Line 1: Connect the “Transparent” plug telephone line cord (2-wire cord) (1) to the unit, then to the Line 1 single-line telephone jack (RJ11C) (2) until you hear a click.

For Line 2: Connect the “GREEN” plug telephone line cord (4-wire cord) (3) to the unit, then to the Line 2 single-line telephone jack (RJ11C) (4) until you hear a click.

1	2
“Transparent” plug
1	3

2	“GREEN”
4	plug

If you use the unit as a single-line telephone only

Be sure to connect the telephone line cord to LINE 1/2. Change the line selection mode from “Auto” to “Line1” (page 17).

Connect the “Transparent” plug telephone line cord (2-wire cord) (1) to the unit, then to the single-line telephone jack (RJ11C) (2) until you hear a click.

1

“Transparent” plug

1

2

For assistance, please visit http://www.panasonic.com/help 9

TG954x(en)_0628_ver031.pdf 9

2013/06/28 12:35:29