Panasonic KX-T2378JXW One-Touch Dialer, To store in an Upper memory location

Page 22

PQQX13204YA-03 01.11.28 8:35 AM y [ W 22

One-Touch Dialer

Storing Phone Numbers in Memory

You can store up to 20 phone numbers in the one-touch auto dial buttons (10 numbers in UPPER memory locations, 10 numbers in LOWER memory locations).

Do not press any one-touch auto dial buttons before storing to prevent misoperation.

Make sure that a call is not put on hold.

(AUTO/LOWER)

One-touch auto dial buttons

(EMERGENCY)

(PROGRAM)

(PAUSE) (SP-PHONE/HEADSET)

and Indicator

To store in an UPPER memory location

It is recommended that you program an emergency number in the EMERGENCY button.

1

2

3

Press (PROGRAM).

Enter a phone number, up to 22 digits.

³If you enter a wrong number, press (PROGRAM) and start again from step 1.

Press one of the one-touch auto dial buttons.

³A long beep sounds.

³The unit will return to the standby mode.

³If 3 beeps sound, the number entered in step 2 may be over 22 digits. Press (PROGRAM) to return to the standby mode, and start again from step 1.

³If a pause is required for dialing, press (PAUSE) where needed. Pressing (PAUSE) counts as one digit (p. 25).

22

Image 22

Contents Model No. KX-T2378JXW For your future reference Accessories includedBefore Initial Use Serial No Date of purchaseContents Location of Controls Indicator p , 17Volume Buttons p MIC Microphone p , 17 Mute Button p Hold Button pButton p One-Touch Auto Dial Buttons p Tone Button p Display pPause Button p Redial Button p Flash Button p Display Connecting the Handset SettingsInstalling the Batteries Press down in the direction Arrow and open the coverTo connect two single-line telephone jacks Connecting the Telephone Line CordTo connect a two-line telephone jack Connect the telephone line cords to the unit as followsConnecting a Communication Device If you use the unit only as a single-line telephoneMake sure that a call is not put on hold Press Program to store the settingProgramming Summary of Preparations Press MuteSelecting the Dialing Mode To select Pulse, press2 To select Tone, press1Time Adjustment You can select AM/PM or 24-hour clock by programmingPress Setting the LCD ContrastSelecting the Ringer Volume Press 1 toWall Template Wall MountingLocks, so the tab holds the handset Using the speakerphone Using the handsetMaking Calls To release the hold To redial the last number dialedTo put a call on hold Automatic RedialWhat the line indicator means Answering CallsUsing the Other Line During a Conversation Ex If you are using LINE1Conference Call Ex If you are using LineDuring a conference call Enter a phone number, up to 22 digits Speed DialerStoring Phone Numbers in Memory Press a memory station number 0 toDialing a Stored Number To erase a stored numberTo store in an Upper memory location One-Touch DialerPress one of the one-touch auto dial buttons If the phone number is in an Upper To store in a Lower memory locationMemory location, press the one-touch From a Lower memory location From an Upper memory locationMemory card How to Use the Pause Button Special FeaturesFor Call Waiting Service Users Temporary Tone DialingSelecting the ﬂash time Muting Your ConversationFlash Button Press Mute while talkingEnter the current PIN code Setting the PIN CodeEnter a new PIN code using a 4-digit Ex is enteredTo set the dial lock To cancel the dial lockDial Lock Enter the PIN code pTo set the call restriction Call RestrictionEnter the PIN code p Ex. Your PIN code is To cancel the call restriction Using the Optional HeadsetConnecting the Optional Headset to the Unit To adjust the headset receiver volume 4 levels Make sure to install the batteriesMaking/Answering Calls Battery Replacement Battery PrecautionsProblem Remedy Before Requesting HelpProblemRemedy Before Requesting HelpSafety Instructions Installations Environment62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PQQX13204YA F1001-1111D