Panasonic KX-T2378JXW operating instructions Before Requesting Help, Problem Remedy

Problem

Remedy

The unit does not work.

³Check the settings (p. 7–14).

³Remove the batteries and reinstall

them to reset the unit.

The unit does not ring.

³The RINGER selector(s) is/are set to

OFF. Set to HIGH or LOW (p. 13).

The line indicators do not

³Check the settings (p. 7–14).

work properly.

³The batteries have become weak.

Replace them with new ones (p. 32).

You cannot dial.

³Check that the dialing mode selection

is correct (p. 11).

³Dial lock mode is set. To cancel the

mode, see page 28.

³The dialed number is restricted. To

cancel, see page 30.

The other party suddenly

³(MUTE) may have been pressed during

cannot hear your voice

the conversation. If “

” is displayed,

during a conversation.

press (MUTE).

You cannot program items

³Programming is not possible when a

such as the dialing mode.

call is put on hold.

³Do not pause for over 60 seconds

while programming.

You cannot store a phone

³Confirm the line button is pressed.

number in memory.

³Programming is not possible when a

call is put on hold.

³Check that the batteries are installed in

the unit and that the battery power is

not low.

³Do not enter a phone number more

than 22 digits long.

While programming, the

³To answer the call, lift the handset or

unit starts to ring and stops

press (SP-PHONE/HEADSET). Start

the program.

again from the beginning after hanging

up.

You cannot redial by

³If the last number dialed was more

pressing (REDIAL).

than 32 digits long, the number will not

be redialed correctly.