Panasonic KX-T2378JXW operating instructions Speed Dialer, Storing Phone Numbers in Memory

Page 20

PQQX13204YA-03 01.11.28 8:35 AM y [ W 20

Speed Dialer

Storing Phone Numbers in Memory

You can store up to 10 phone numbers in memory. The dialing buttons

((0) to (9)) function as memory stations. Do not press any memory stations before storing to prevent misoperation.

Make sure that a call is not put on hold.

(PROGRAM)

Memory Station Numbers

(AUTO/LOWER)

(PAUSE)

	(SP-PHONE/HEADSET) and Indicator
1	Press (PROGRAM).

2	Enter a phone number, up to 22 digits.

	³If you enter a wrong number, press
3	(PROGRAM) and start again from step 1.

	Press (AUTO/LOWER).

4	Press a memory station number ((0) to
	(9)).

³A long beep sounds.

³The unit will return to the standby mode.

³If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift the handset and place it on the cradle to return to the standby mode, and start again from step 1.

³You can exit the programming mode in step 1 and 2 by pressing (PROGRAM). ³If a pause is required for dialing, press (PAUSE) where needed. Pressing

(PAUSE) counts as one digit (p. 25).

20

Image 20

Contents Model No. KX-T2378JXW Accessories included Before Initial UseFor your future reference Serial No Date of purchaseContents Indicator p , 17 VolumeLocation of Controls Buttons p MIC Microphone p , 17 Mute Button p Hold Button pPause Button p Redial Button p Flash Button p One-Touch Auto Dial Buttons p Tone Button p Display pButton p Display Settings Installing the BatteriesConnecting the Handset Press down in the direction Arrow and open the coverConnecting the Telephone Line Cord To connect a two-line telephone jackTo connect two single-line telephone jacks Connect the telephone line cords to the unit as followsConnecting a Communication Device If you use the unit only as a single-line telephonePress Program to store the setting Programming Summary of PreparationsMake sure that a call is not put on hold Press MuteSelecting the Dialing Mode To select Pulse, press2 To select Tone, press1Time Adjustment You can select AM/PM or 24-hour clock by programmingSetting the LCD Contrast Selecting the Ringer VolumePress Press 1 toLocks, so the tab holds the handset Wall MountingWall Template Making Calls Using the handsetUsing the speakerphone To redial the last number dialed To put a call on holdTo release the hold Automatic RedialWhat the line indicator means Answering CallsUsing the Other Line During a Conversation Ex If you are using LINE1During a conference call Ex If you are using LineConference Call Speed Dialer Storing Phone Numbers in MemoryEnter a phone number, up to 22 digits Press a memory station number 0 toDialing a Stored Number To erase a stored numberPress one of the one-touch auto dial buttons One-Touch DialerTo store in an Upper memory location Memory location, press the one-touch To store in a Lower memory locationIf the phone number is in an Upper Memory card From an Upper memory locationFrom a Lower memory location Special Features For Call Waiting Service UsersHow to Use the Pause Button Temporary Tone DialingMuting Your Conversation Flash ButtonSelecting the ﬂash time Press Mute while talkingSetting the PIN Code Enter a new PIN code using a 4-digitEnter the current PIN code Ex is enteredTo cancel the dial lock Dial LockTo set the dial lock Enter the PIN code pEnter the PIN code p Ex. Your PIN code is Call RestrictionTo set the call restriction Connecting the Optional Headset to the Unit Using the Optional HeadsetTo cancel the call restriction Making/Answering Calls Make sure to install the batteriesTo adjust the headset receiver volume 4 levels Battery Replacement Battery PrecautionsProblem Remedy Before Requesting HelpProblemRemedy Before Requesting HelpSafety Instructions Installations Environment62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PQQX13204YA F1001-1111D