PQQX13204YA-03 01.11.28 8:35 AM y [ W 23
Ò
To store in a LOWER memory location
1 Press (PROGRAM).
2 | Enter a phone number, up to 22 digits. |
³If you enter a wrong number, press |
| (PROGRAM) and start again from step 1. |
3 Press (AUTO/LOWER).
4 Press one of the one-touch auto dial buttons.
³A long beep sounds.
³The unit will return to the standby mode.
³If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift the handset and place it on the cradle to return to the standby mode, and start again from step 1.
³If a pause is required for dialing, press (PAUSE) where needed. Pressing (PAUSE) counts as one digit (p. 25).
To erase a stored number
1 Press (PROGRAM).
2 | If the phone number is in an UPPER |
memory location, press the one-touch |
auto dial button for the phone number to be erased.
OR
If the phone number is in a LOWER memory location, press (AUTO/LOWER), then press the one-touch auto dial button for the phone number to be erased.
³A long beep sounds.
³The unit will return to the standby mode.
Model No. KX-T2378JXW
Serial No Date of purchase
Accessories included
Before Initial Use
For your future reference
Contents
Buttons p MIC Microphone p , 17 Mute Button p Hold Button p
Indicator p , 17
Volume
Location of Controls
Pause Button p Redial Button p Flash Button p
One-Touch Auto Dial Buttons p Tone Button p Display p
Button p
Display
Press down in the direction Arrow and open the cover
Settings
Installing the Batteries
Connecting the Handset
Connect the telephone line cords to the unit as follows
Connecting the Telephone Line Cord
To connect a two-line telephone jack
To connect two single-line telephone jacks
If you use the unit only as a single-line telephone
Connecting a Communication Device
Press Mute
Press Program to store the setting
Programming Summary of Preparations
Make sure that a call is not put on hold
To select Pulse, press2 To select Tone, press1
Selecting the Dialing Mode
You can select AM/PM or 24-hour clock by programming
Time Adjustment
Press 1 to
Setting the LCD Contrast
Selecting the Ringer Volume
Press
Locks, so the tab holds the handset
Wall Mounting
Wall Template
Making Calls
Using the handset
Using the speakerphone
Automatic Redial
To redial the last number dialed
To put a call on hold
To release the hold
Answering Calls
What the line indicator means
Ex If you are using LINE1
Using the Other Line During a Conversation
During a conference call
Ex If you are using Line
Conference Call
Press a memory station number 0 to
Speed Dialer
Storing Phone Numbers in Memory
Enter a phone number, up to 22 digits
To erase a stored number
Dialing a Stored Number
Press one of the one-touch auto dial buttons
One-Touch Dialer
To store in an Upper memory location
Memory location, press the one-touch
To store in a Lower memory location
If the phone number is in an Upper
Memory card
From an Upper memory location
From a Lower memory location
Temporary Tone Dialing
Special Features
For Call Waiting Service Users
How to Use the Pause Button
Press Mute while talking
Muting Your Conversation
Flash Button
Selecting the flash time
Ex is entered
Setting the PIN Code
Enter a new PIN code using a 4-digit
Enter the current PIN code
Enter the PIN code p
To cancel the dial lock
Dial Lock
To set the dial lock
Enter the PIN code p Ex. Your PIN code is
Call Restriction
To set the call restriction
Connecting the Optional Headset to the Unit
Using the Optional Headset
To cancel the call restriction
Making/Answering Calls
Make sure to install the batteries
To adjust the headset receiver volume 4 levels
Battery Precautions
Battery Replacement
Before Requesting Help
Problem Remedy
Before Requesting Help
ProblemRemedy
Installations Environment
Safety Instructions
PQQX13204YA F1001-1111D
62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan