Panasonic KX-T2378JXW operating instructions Answering Calls, What the line indicator means

Page 17

PQQX13204YA-03 01.11.28 8:35 AM y [ W 17

What the line indicator means

Off	The line is free.

On (red)	You are using the line or someone else is using the
	line on a parallel connected telephone.

On (green)	A call is on hold.

Flashing (red)	A call is being received.

Answering Calls

While a call is being received, the unit rings and the called line indicator ﬂashes red.

Using the handset

Line Buttons and Indicators

Basic

1	Press the line button
1	whose indicator is
	ﬂashing.
2	Lift the handset.
2	³The line indicator lights red.
3	To hang up, place the
3	handset on the cradle.

³The indicator light goes out.

Using the speakerphone

MIC (Microphone)

(SP-PHONE/HEADSET) and Indicator

Operation

1	Press the line button whose indicator is ﬂashing.
2	Press (SP-PHONE/HEADSET).
2	³The line indicator lights red and the SP-PHONE/HEADSET indicator light.
3	Talk into the MIC (microphone).
4	To hang up, press (SP-PHONE/HEADSET).
4	³The indicator lights go out.

³When the RINGER selector(s) is/are set to OFF (p. 13), the selected line(s) will not ring.

³Be sure that the (CONF) (Conference) button is released.

17

Image 17

Contents Model No. KX-T2378JXW Before Initial Use Accessories includedFor your future reference Serial No Date of purchaseContents Volume Indicator p , 17Location of Controls Buttons p MIC Microphone p , 17 Mute Button p Hold Button pPause Button p Redial Button p Flash Button p One-Touch Auto Dial Buttons p Tone Button p Display pButton p Display Installing the Batteries SettingsConnecting the Handset Press down in the direction Arrow and open the coverTo connect a two-line telephone jack Connecting the Telephone Line CordTo connect two single-line telephone jacks Connect the telephone line cords to the unit as followsIf you use the unit only as a single-line telephone Connecting a Communication DeviceProgramming Summary of Preparations Press Program to store the settingMake sure that a call is not put on hold Press MuteTo select Pulse, press2 To select Tone, press1 Selecting the Dialing ModeYou can select AM/PM or 24-hour clock by programming Time AdjustmentSelecting the Ringer Volume Setting the LCD ContrastPress Press 1 toLocks, so the tab holds the handset Wall MountingWall Template Making Calls Using the handsetUsing the speakerphone To put a call on hold To redial the last number dialedTo release the hold Automatic RedialAnswering Calls What the line indicator meansEx If you are using LINE1 Using the Other Line During a ConversationDuring a conference call Ex If you are using LineConference Call Storing Phone Numbers in Memory Speed DialerEnter a phone number, up to 22 digits Press a memory station number 0 toTo erase a stored number Dialing a Stored NumberPress one of the one-touch auto dial buttons One-Touch DialerTo store in an Upper memory location Memory location, press the one-touch To store in a Lower memory locationIf the phone number is in an Upper Memory card From an Upper memory locationFrom a Lower memory location For Call Waiting Service Users Special FeaturesHow to Use the Pause Button Temporary Tone DialingFlash Button Muting Your ConversationSelecting the ﬂash time Press Mute while talkingEnter a new PIN code using a 4-digit Setting the PIN CodeEnter the current PIN code Ex is enteredDial Lock To cancel the dial lockTo set the dial lock Enter the PIN code pEnter the PIN code p Ex. Your PIN code is Call RestrictionTo set the call restriction Connecting the Optional Headset to the Unit Using the Optional HeadsetTo cancel the call restriction Making/Answering Calls Make sure to install the batteriesTo adjust the headset receiver volume 4 levels Battery Precautions Battery ReplacementBefore Requesting Help Problem RemedyBefore Requesting Help ProblemRemedyInstallations Environment Safety InstructionsPQQX13204YA F1001-1111D 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan